Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Holley Modular Ultra Lo-Ram EFI Manifold LS1/2/6

Ultra Lo-Ram Manifold Kit - LS1/2/6

Part # 300-621 Be the first to write a review

Holley Modular Ultra Lo-Ram EFI Manifold LS1/2/6

In Stock
Free Shipping - Lower 48 US States
$907.95
Add to Wishlist
Starting at $80 a month with Learn More
3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
The Holley LS1/2/6 Ultra Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications and the 105 mm throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The 300-621 Lo-Ram plenum entry was configured to provide a very low profile modular intake manifold suitable for turbocharged or centrifugally supercharged engines. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.

Features:

  • Designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads
  • Designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application.
  • With forced-induction and the short runner length the engine rpm at which peak power occurs is more likely to be coupled to the supercharger or turbocharger being used
  • Modular design allowing the use of front-feed plenum entry
  • Intake design facilitates custom inlet duct and throttle body placement
  • Low height to fit under a stock or mildly modified hood in the front configuration
  • Front entry plenum flange allows design & fabrication of special throttle body adapters or inlet ducts for custom installations
  • Clears 4th Gen Camaro and C5 Corvette cowls and hoods without modification
  • High volume fuel rails and mounting hardware included with ¾”-16 o-ring ports (8 AN)

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Brand Holley EFI
ColorSilver
ConstructionCast
Emission Code3
EngineGM LS1/LS2/LS6
FinishSilver
Flange StyleEFI
Front Height6.86" height with throttle body adapter
Fuel System TypeEFI
Injector QuantitySingle
Inlet LocationFront
Manifold TypeUltra Lo-Ram
Product TypeIntake Manifold
Recommended UseForced Induction
RPM Power Band3500-8000 RPM
Sale CategoryAir and Fuel Delivery
WarrantyLimited 90 Day
UPC090127077573
Part Number300-621
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Lo-Ram Base Intake Manifold Plenum Top Mounting Flange Height - 5.17" Front Feed Plenum Configuration w/105mm Throttle Body Adapter - 6.86"
Limited 90 Day: See Details
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.