Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Hooker BlackHeart LS SWAP Exhaust Adapter Kit

1973-1974 C10, connects Hooker 8501HKR manifolds to Hooker 2.5" Exhaust Kits

Part # 70701403-RHKR Be the first to write a review

Hooker BlackHeart LS SWAP Exhaust Adapter Kit

In Stock
Free Shipping - Lower 48 US States
$175.95
Add to Wishlist
8

Emissions

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle.

See Emissions Details
When connecting Hooker Cast Manifolds to a 2.5" diameter Hooker exhaust kit, an adapter pipe is required to fill that gap between the end of the manifolds and our Hooker exhaust systems.

Features:

  • Designed to connect 8501HKR exhaust manifolds to C10 LS Swap 2.5" exhaust systems
  • 409 Stainless steel construction

About Hooker BlackHeart

Shop the official site of Hooker BlackHeart and explore exhaust systems, engine swap kits, and mufflers for both import and domestic vehicles at Holley.com!

Application1973-1974 GM C10/15 2WD pickup
1973-1974 GM C10/20 2WD pickup
Brand Hooker BlackHeart
Choose Your PartAdapter Kit
Emission Code8
Material409 Stainless Steel
Product TypeAdapter Kit
Tubing Diameter (in)2.5
UPC090127720363
Part Number70701403-RHKR
8

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

  • If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
  • The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
  • The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
  • An EO legal engine swap kit is utilized (such as a GM EROD)
  • The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.

Holley is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.

EPA Website
https://www.epa.gov/enforcement/epa-tampering-policy-epa-enforcement-policy-vehicle-and-engine-tampering-and-aftermarket

CARB Website
https://ww3.arb.ca.gov/msprog/aftermkt/aftermkt.htm

When connecting mid length headers and cast iron manifolds to our full exhaust kits, an adapter pipe is required to fill that gap between the end of the headers or manifolds and our Hooker exhaust systems (which are designed to work with long tube header systems). Hooker has created a full line of adapter tubes that fill the gap and include all hardware and gaskets for a clean and simple connection.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.