Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Earl's Vapor Guard™ Hose

Earl's Vapor Guard™ - 5/16" EFI Hose - 10 Foot Length

Part # 751055ERL Be the first to write a review

Earl's Vapor Guard™ Hose

In Stock
Free Shipping on orders over $150*
$61.03
Add to Wishlist
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
Modern fuels are at war with your fuel system. Modern fuels (more than 40 EPA-approved fuel blends in the US alone) include additives that break down traditional rubber hose. This breakdown leads to potentially dangerous leaks & weeping as well as vapors that waste fuel and leave unwanted odors in your shop. Once fuel lines are degraded, hose particles can contaminate and obstruct fuel injectors and carburetor passages. Earl's Vapor Guard hose and hose ends provide a complete, economical solution that virtually eliminates these fuel permeation issues common with most rubber fuel lines. The secret to Earl's Vapor Guard hose is in its layers. The innermost Primary Barrier Layer offers high resistance to heat and aggressive fuels. The middle Earl's Vapor Guard™ Barrier is a Thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The Exterior Cover Barrier provides extreme tolerance to heat and ozone giving Earl's Vapor Guard a three way shield against hose deterioration.

Features:

  • Multi-layer rubber hose designed to withstand to the corrosive properties of modern fuels
  • Multi-fuel compatible: Approved for use with leaded and unleaded Gasoline, Diesel, Biodiesel, E-85, 100% Methanol, ETHANOL and Gasohol fuels
  • A two foot section of Earl’s Vapor Guard saves one gallon of gas each year as compared to traditional rubber hose from permeation alone
  • Primary Barrier Liner – initial layer offers high resistance to heat and aggressive fuels
  • Vapor Guard Barrier – Thermoplastic layer provides superior fuel isolation significantly reducing vapors from escaping through the hose
  • Reinforcement braid-aramid material – (EFI hose only) is used to provide the higher pressure rating that is required with fuel injection
  • Exterior cover – provides extreme tolerance of heat and ozone
  • Choose from carburetor or higher pressure EFI hose
  • Hose available in 5/16” and 3/8” sizes
  • Not for use in applications where the hose is submersed in fuel
  • Fuel Injection Hose – Rated Maximum 225 PSI

About Earl's

Shop the official site of Earl's Performance Plumbing and discover our selection of end-to-end fittings, hoses, and automotive plumbing solutions at Holley.com!​

Brand Earl's
Compatible Hose EndsVapor Guard
Emission Code5
Fluid TypeBio-Fuels
Coolant
Diesel
E85
Pump Gas
Race Gas
Fluid Type Rating - Bio-Fuels4 out of 5 Rating
Fluid Type Rating - Coolant5 out of 5 Rating
Fluid Type Rating - Diesel4 out of 5 Rating
Fluid Type Rating - E853 out of 5 Rating
Fluid Type Rating - Methanol/Alcohol2 out of 5 Rating
Fluid Type Rating - Pump Gas4 out of 5 Rating
Fluid Type Rating - Race Gas4 out of 5 Rating
Fuel System TypeEFI
Hose FamilyVapor Guard
Hose Length10 Feet
Hose Size5/16
Max PSI225
Max Vacuum10 inHg
Min. Bend Radius2.5 in.
Outside Diameter.585 in.
Product TypeHose
Submersible in FuelNo
Temperature Range-40°F to 275°f
UPC090127727607
Part Number751055ERL
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Vapor Guard hose must be used with Vapor Guard hose ends and clamps (other hose barb style fittings or hose ends may damage the inner liner on the hose) Vapor Guard is not Recommended for Vacuum applications.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.