MENU

EARLS Speed-Flex Pre-Made Hose

Speed-Flex Line 3 AN Female Swivel Both Ends Hose Size 3 Length 13 In.

PART# 63010113ERL

Be the first to write a review
$17.72   Suggested Retail
$15.95   Your Price
Free Shipping on orders over $100*
In Stock  
Qty: 
Add to Wish List

We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.

Overview

Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.

Features:

  • Extruded PTFE
  • Standard Of Racing Industry
  • Firmer Brake Feel
  • For Flexible Brake & Clutch Hoses
  • For Instrument Hoses
  • Pressure Tested To 4000 PSI

Specs

BrandEarls
Fluid TypeAutomatic Transmission Fluid
Bio-Fuels
Brake
Coolant
Diesel
E85
Methanol/Alcohol
Oil
Pump Gas
Race Gas
Hose End #13 AN FEMALE
Hose End #23 AN FEMALE
Hose Outer MaterialSTAINLESS STEEL
Hose Size3 AN
Length13 In.
Product TypeHose Assembly
PTFE Wall Thickness.040"
Submersible in FuelYes
Part Number63010113ERL

Tech Resources

We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.
Also Bought
    Reviews

      *Free Shipping & Handling only offered to the contiguous US on orders over $100.

      Some parts are not legal for use in California or other states with similar regulations.

       X  lsx sweepstakes 2018
       X  lsx sweepstakes 2018