Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Earl's Speed-Flex Hyperfirm® Pre-Made Hose

Speed-Flex Line 3 AN Female Swivel Both Ends Hose Size 3 Length 15 In.

Part # 63010115ERL Be the first to write a review

Earl's Speed-Flex Hyperfirm® Pre-Made Hose

In Stock
Free Shipping on orders over $150*
Clearance
$18.07
was $28.69
save 37%
Add to Wishlist
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.

Features:

  • Extruded PTFE
  • Standard Of Racing Industry
  • Firmer Brake Feel
  • For Flexible Brake & Clutch Hoses
  • For Instrument Hoses
  • Pressure Tested To 4000 PSI

About Earl's

Shop the official site of Earl's Performance Plumbing and discover our selection of end-to-end fittings, hoses, and automotive plumbing solutions at Holley.com!​

Brand Earl's
Clearance CategoryPlumbing AN Fittings and Hose
Emission Code5
Fluid TypeAutomatic Transmission Fluid
Bio-Fuels
Brake Fluid
Coolant
Diesel
E85
Methanol/Alcohol
Oil
Pump Gas
Race Gas
Fluid Type Rating - Automatic Transmission Fluid5 out of 5 Rating
Fluid Type Rating - Bio-Fuels5 out of 5 Rating
Fluid Type Rating - Brake Fluid5 out of 5 Rating
Fluid Type Rating - Coolant5 out of 5 Rating
Fluid Type Rating - Diesel5 out of 5 Rating
Fluid Type Rating - E855 out of 5 Rating
Fluid Type Rating - Methanol/Alcohol5 out of 5 Rating
Fluid Type Rating - Oil5 out of 5 Rating
Fluid Type Rating - Power Steering Fluid5 out of 5 Rating
Fluid Type Rating - Pump Gas5 out of 5 Rating
Fluid Type Rating - Race Gas5 out of 5 Rating
Fluid Type Rating - Vacuum1 out of 5 Rating
Hose End #13 AN FEMALE
Hose End #23 AN FEMALE
Hose End FinishElectroless Nickel Plated
Hose End MaterialSteel
Hose Outer MaterialStainless Steel
Hose Size3 AN
Inside Diameter.120"-.143"
Length15 In.
Max Working PSI2000 PSI
Min. Bend Radius1.5"
Outside Diameter.214"-.258"
Product TypeHose Assembly
PTFE Wall Thickness.040"
Sale CategoryPlumbing AN Fittings and Hose
Submersible in FuelYes
Temperature Range-65⁰ to 450⁰ F
UPC021432172943
Part Number63010115ERL
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.