ASK OUR EXPERTS: 1-866-464-6553
MENU
Search
1-866-464-6553
 Larger Image
Weiand Tech Segement - SuperchargersYouTube Button

Weiand 6-71 Supercharger Kit - Satin

Chevy Small Block (1955-86), Long Nose, 3" Gilmer Drive Belt (8mm Pitch), Satin Finish

PART# 7587

Be the first to write a review
$3,849.95   Suggested Retail
$3,291.70   Holleydays Price
Build to order - Estimated shipping date: 01/08/2020
Email Me When Available
Free Shipping
Qty: 
Add to Wish List

Starting at $290 a month with Learn More
NOT compatible w/ Mercruiser, OMC or Volvo Penta accessory drives and requires short water pump and 2 "V" pulley.

Weiand does not recommend using a supercharger with a Gilmer toothed belt and pop-off valve in an enclosed engine compartment. There is a high risk of explosion in the event of a backfire.

6-71 superchargers are perfectly suited for engines with 7.5:1 to 8:1 compression ratios but may require race gas unless pulley ratios are altered to reduce effective compression ratio below 12:1.

Weiand recommends that all kits use double keyed crankshaft and double keyed, steel, SFI approved balancer.

Kits include manifold, blower assembly, drive snout, pulleys, belt and hardware.

Due to the wide variety of installation possibilities, it may be necessary to consult with a Weiand Supercharger Technical Rep at 270-781-9741 for assistance in selecting the proper kit for your application.

Overview

A true blast form the past. These highly sought after superchargers have been unavailable for years. Weiand is proud to reintroduce them. The case of the 6-71 and 8-71 superchargers have been redesigned for a nostalgic look that will look at home on a cacklefest dragster as well as a new high end build. HORSEPOWER! - Weiand's 6-71 kits are the ultimate statement of power and looks. Pull into the local cruise-in or dragstrip with one of these sticking through the hood and you will get noticed. They're not for the meek however - these supercharger kits are designed to generate 50%+ more horsepower and torque across the rpm range! Weiand's 6-71 blower kits are equipped with exclusive two lobe rotors for maximum boost at lower RPMs. All feature a new case, end-plates, manifold and snout. Billet belt tensioner components and V-belt pulleys round out the package to give you everything necessary for installation. Kits are engineered to produce 10-12 lbs of boost on small blocks and 5-7 lbs of boost on big blocks but are a simple pulley change away from pump gas or hard core racing. The 7587 kits fearture he extra tough 8mm (two piece billet snout) belt systems for durability while on the street or water. All superchargers are built in Weiand's state-of-the-art manufacturing cell and each supercharger is 100% boost tested to help you squeeze out maximum power and efficiency.

Features:

  • Long Nose
  • 3" Gilmer Drive Belt
  • 11.5% Underdriven Drive Ratio w/ Included Pulley Set
  • Satin Finish
  • Instant, full-time power every time you hit the throttle
  • Substantially increases torque

Specs

Blower Size6-71
BrandWeiand
Emission Code3
EngineChevy Small Block V8
FinishSatin
Product TypeSupercharger
Supercharger Drive Pulley8MM
WarrantyLimited 90 Day
Part Number7587

Service Parts


Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.

The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle

Tech Resources

Addendum for Part# 7587
Pop Off Valve Instructions for Part# 7587
Bolt Notice for Part# 7587
Notice for Part# 7587
General Information for Part# 7587
Instructions for Part# 7587
Linkage Instructions for Part# 7587
Technical Information for 7587
NOT compatible w/ Mercruiser, OMC or Volvo Penta accessory drives and requires short water pump and 2 "V" pulley.

Weiand does not recommend using a supercharger with a Gilmer toothed belt and pop-off valve in an enclosed engine compartment. There is a high risk of explosion in the event of a backfire.

6-71 superchargers are perfectly suited for engines with 7.5:1 to 8:1 compression ratios but may require race gas unless pulley ratios are altered to reduce effective compression ratio below 12:1.

Weiand recommends that all kits use double keyed crankshaft and double keyed, steel, SFI approved balancer.

Kits include manifold, blower assembly, drive snout, pulleys, belt and hardware.

Due to the wide variety of installation possibilities, it may be necessary to consult with a Weiand Supercharger Technical Rep at 270-781-9741 for assistance in selecting the proper kit for your application.

Warranty Information

Limited 90 Day: See Details
We Suggest
    Reviews

      *Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

      Some parts are not legal for use in California or other states with similar regulations.

       X  Holleydays