Since the flash tune program's inception in 1996, the one requirement was that the tune needed to be installed at a Dinan authorized dealer. This forced those in the international market or those in rural areas away from our core markets to either send in their DME for a bench flash or to simply live without Dinan tuning. No one should miss out on the chance to experience a Dinan tuned BMW so for those not near an authorized Dinan dealer a solution to tune your BMW is finally available in an easy to use DIY package. Complete with the various interface cabling that is needed for the vehicle the kit enables the end-user to be able to flash their own vehicle in the comfort of their own garage. The kit will also allow the user to flash the vehicle between stock and Dinan at a moment's notice whenever the need may arise.
NOTE: When ordering please ensure you have your VIN ready for the checkout process. It is crucial that it is typed in accurately and completely at that time. While we offer the DIY kits in Stage 1 form the additional stages will need to be purchased and installed at an authorized dealer as they require hard parts to function properly.
Propelling it up that notch is the Dinan Stage 1 Performance Engine Software. As always, Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles, including the possibility of consequential damages. No one offers better performance or backs it up with such comprehensive warranty coverage.
The Dinan Performance Engine Software safely increases turbo-boost pressure from the stock 14.0 to 18.0 psi, along with properly retuned fuel mixtures, ignition timing, and full map rescaling. In fact, over 2000 lines of code have been addressed, producing substantial increases in power output while maintaining the civility and reliability expected of a Dinan performance product.
The top speed governor is removed with Dinan's software, the B7 will be capable of achieving its natural top speed as the governor has been removed.
The results of Dinan's tuning are nothing short of breathtaking, with the added boost and related recalibration producing a maximum output of 573 horsepower at 5500 rpm and 644 lb-ft torque at 3500 rpm.
More Power: Max gains of +80 HP @ 6500 RPM and +134 lb-ft TRQ @ 3500 RPM
Improved throttle response
Top speed governor removed
Full Map Rescaling, for drivability from idle to wide open throttle and everywhere in between
Properly Returned Fuel Mixtures, to save you gas and protect your engine
Retain all BMW factory engine damage safeguards
Includes programming cables and software license for a single VIN
Dinan Point Value
Factory Rated HP
Factory Rated Torque (lb-ft)
Labor Time (Hours)
Max HP Gain
80 @ 6500 RPM
Max Torque (lb-ft) Gain
134 @ 3500 RPM
573 @ 5500 RPM
Peak HP Gain
73 @ 5500 RPM
Peak Torque (lb-ft)
644 @ 3500 RPM
Peak Torque (lb-ft) Gain
128 @ 3500 RPM
DIY Flash Kit
This part is legal for sale or use on Racing Use Only Vehicles
The following vehicles are considered Racing Use Only Vehicles:
Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street
WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Not compatible with the Alpina B7 (F01/F02) from 2013-2015.
When programmed the pressure sensors in both intercoolers must be replaced with 2x BMW 13 62 7 585 494. Refer to TIS procedures 1362591 and 1362592. These sensors are not included with the software and must be purchased separately from your BMW dealer.
*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.
Some parts are not legal for use in California or other states with similar regulations.