Skip to main content
ASK OUR EXPERTS
1-866-464-6553
Dinan

Dinan Stage 3 Performance Engine Software - 2011-2013 BMW 135i/135is/335i

E82/E88/E90/E92/E93

Part # D900-31TC Be the first to write a review

Dinan Stage 3 Performance Engine Software - 2011-2013 BMW 135i/135is/335i

Free Shipping - Lower 48 US States
Suggested Retail
$299.95
Find a Dealer
Starting at $27 a month with Learn More
1

Emissions

This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.

See Emissions Details
Stage 3 Engine Software is for use with the Dinan Oil Cooler and Intercooler; optimizing performance and drivability from the combination. The Dinan Team made a blistering fast software upgrade, using our years of experience tuning BMWs for the street as well as winning back-to-back Grand-AM DP Championships and the 2011 24 Hours of Daytona. Dinan Performance Software is so much more than just turning up the turbo boost. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the program is tested on the dyno and in the real world for durability and drivability. Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles including the possibility of consequential damages. The top speed governor is removed on Manual RWD vehicles only, enabling the BMW to achieve its full potential.

Features:

  • More Power (with Oil Cooler and Intercooler): Max gains of +60 HP @ 5300 RPM and +80 lb-ft TRQ @ 3900 RPM
  • 50 State Emissions legal; CARB EO # D-176-39
  • Huge torque gains drastically improves acceleration
  • No hesitation between shifts
  • Downloads through the BMW diagnostic port, the same way BMW loads software
  • Top speed governor removed on manual RWD vehicles, you decided how fast you want to go. 
  • Full Map Rescaling, for drivability from idle to wide open throttle and everywhere in between
  • Properly Returned Fuel Mixtures, to save you gas and protect your engine
  • Water Pump Speed Increased, to improve cooling
  • Retain all BMW factory engine damage safeguards

About Dinan

Dinan knows European marques – quite literally – from the inside out. Whether you need hard parts such as exhaust systems or coilovers, or ECU upgrades to unlock your engine's potential, Dinan has the parts to take your BMW, Mercedes-Benz, or Mini to the next level.

Brand Dinan
Dinan Point Value3
Emission Code1
Factory Rated HP300
Factory Rated Torque (lb-ft)300
Labor Time0.5 hrs
Labor Time (Hours)0.5
Max HP Gain60 @ 5300 RPM
Max Torque (lb-ft) Gain80 @ 3900 RPM
Peak HP373 @ 5300 RPM
Peak HP Gain60 @ 5300 RPM
Peak Torque (lb-ft)408 @ 3500 RPM
Peak Torque (lb-ft) Gain79 @ 3500 RPM
Product TypeEngine Software
Required ItemsDinan Oil Cooler (various SKU's) and Intercooler (D330-0009B, D330-0010B, D330-0012, D330-0013 or D330-0015)
Part NumberD900-31TC
1

This part is legal for sale and use on Emissions Controlled Vehicles, in all 50 states, when used in accordance with the manufacturers application guide because it has a California Air Resources Board (CARB) Executive Order (EO) number.

The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Oil Cooler and Intercooler are required in order to run Stage 3 Engine Software.
Reviews

    Your Review

    *Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.