Skip to main content
Spring Cleaning Sale - Big Savings!
Motor Life Events Community Support
ASK OUR EXPERTS
1-866-464-6553

If you're using a spreadbore intake manifold and going the forced induction route, you're in luck thanks to the dual mounting pattern flange incorporated into the Super Sniper and Sniper XFlow systems. Each system can handle varying levels of power, so be sure to check out the bullet points below to ensure you select the correct system for your application.

Super Sniper EFI 650

  • Supports up to 650 horsepower with four 100 lb/hr Injectors
  • Compatible with Draw-Thru or Blow-Thru forced induction applications
  • User-friendly Boost Control with handheld adjustability
  • Programmable Target Air Fuel Ratios per Boost level
  • Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time – Same popular boost control offered in Holley HP and Dominator EFI systems!
  • 2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
  • Dry or Wet Nitrous Support
  • Built-in Single stage progressive nitrous control
  • Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
Shop Super Sniper EFI 650

Super Sniper EFI 1250

  • 1250 HP version features eight 100 Lb/Hr Injectors (Forced Induction)
  • The 800 CFM Main Body will support 650 Horsepower Naturally Aspirated
  • Compatible with Draw thru or blow thru forced induction applications
  • Built-in Single stage progressive nitrous control
  • Programmable inputs and outputs
  • User-friendly Boost Control with handheld adjustability
  • Programmable Target Air Fuel Ratios per Boost level
  • Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time – Same popular boost control offered in Holley HP and Dominator EFI systems!
  • 2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
  • Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
Shop Super Sniper EFI 1250

Sniper EFI XFlow

  • The Standard Sniper XFlow features four 120 lb/hr injectors and will support up to 800 horsepower
  • The Sniper XFlow 1375 houses eight 120 lb/hr injectors to support up to 1375 horsepower
  • Compatible with draw through or blow through forced induction applications
  • 2.5 Bar MAP Sensor can handle up to 21.5 psi of boost
  • Built in Single stage progressive nitrous control
  • User friendly Boost Control with handheld adjustability
  • Programmable Target Air Fuel Ratios per Boost level
  • Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
  • Six Programmable Ground Outputs
  • One +5v Reference Output - +5V Power Supply for 0-5v Sensors
  • One Sensor Ground – Ground supply for 0-5v Sensors
  • Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 is recommended)
  • Requires an external fuel pressure regulator: P/N 12-848 up to 800 HP or 12-851 for 1000+ HP.
Shop Sniper EFI XFlow

Related Products