Super Sniper EFI

ASK OUR EXPERTS

Super Sniper EFI 650

650 HP version features four 100 Lb/Hr Injectors
Compatible with Draw-Thru or Blow-Thru forced induction applications
User-friendly Boost Control with handheld adjustability
Programmable Target Air Fuel Ratios per Boost level
Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time – Same popular boost control offered in Holley HP and Dominator EFI systems!
2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
Dry or Wet Nitrous Support
Built-in Single stage progressive nitrous control
Progressive or Non-Progressive control strategies
Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI)

1250 HP version features eight 100 Lb/Hr Injectors (Forced Induction)
The 800 CFM Main Body will support 650 Horsepower Naturally Aspirated and up to 1250 in boosted applications
Compatible with Draw thru or blow thru forced induction applications
Built-in Single stage progressive nitrous control
Programmable inputs and outputs
Integrated ignition timing control for precise timing curves
User-friendly Boost Control with handheld adjustability
Programmable Target Air Fuel Ratios per Boost level
Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time – Same popular boost control offered in Holley HP and Dominator EFI systems!
2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
Built-in Single stage progressive nitrous control
Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
Six Programmable Ground Outputs
One Sensor Ground – Ground supply for 0-5v Sensors
Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI)

Supports up to 650hp with Four 100 Lb/Hr Injectors
2.5 Bar MAP sensor supports up to 21.5 psi of boost
All of the wiring exits below the rear fuel injector cover, for a completely stealth installation.
Timed spark part for vacuum advanced distributors located under the front fuel bowl, for easy access to the distributor.
Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
Six Programmable Ground Outputs
One +5v Reference Output - +5V Power Supply for 0-5v Sensors
One Sensor Ground – Ground supply for 0-5v Sensors
Air entry is machined to fit most stock style air cleaners with air cleaner locator provisions.
External fuel pressure regulator required, set to a base pressure of 58.5 PSI e.g. part # 12-886.

Supports up to 650 hp naturally aspirated and 1250hp in boosted applications with Eight 100 Lb/Hr Injectors
All of the wiring exits below the rear fuel injector cover, for a completely stealth installation
Timed spark part for vacuum advanced distributors located under the front fuel bowl, for easy access to the distributor
External fuel pressure regulator required, set to a base pressure of 58.5 PSI, such as 12-886
Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
Six Programmable Ground Outputs
One +5v Reference Output - +5V Power Supply for 0-5v Sensors
One Sensor Ground – Ground supply for 0-5v Sensors
Air entry is machined to fit most stock style air cleaners with air cleaner locator provisions.

The base Sniper XFlow supports up to 800 horsepower in all applications with four 120 lb/hr injectors
The Sniper XFlow 1375 supports up to 800 horsepower naturally aspirated and 1375 horsepower in forced induction applications with eight 120 lb/hr injectors
Compatible with Draw through or Blow through forced induction applications
2.5 Bar MAP Sensor can handle up to 21.5 psi of boost
Built in Single stage progressive nitrous control
User friendly Boost Control with handheld adjustability
Programmable Target Air Fuel Ratios per Boost level
Advanced boost control available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time.
Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
Six Programmable Ground Outputs
One +5v Reference Output - +5V Power Supply for 0-5v Sensors
One Sensor Ground – Ground supply for 0-5v Sensors
Dual Pattern bolt on carburetor replacement, designed to fit squarebore and spreadbore manifolds - (Spreadbore Sealing Plate Part #9006 is recommended)
Requires an external fuel pressure regulator: P/N 12-848 up to 800 HP or 12-851 for 1000+ HP.