Holley Blog
Hays Twister Full Race Torque Converters
| 01/22/2019Hays Twister Full Race Torque Convertors are designed for quick, hard launches and give you time killing ET’s!
Read MoreHow To Choose Mr. Gasket Automotive Hose
| 01/17/2019For more than half a century, Mr. Gasket has been the go-to source for racers, offering a full line of gaskets, fasteners and more. Mr. Gasket’s ever-expanding line of plumbing products continues this tradition with high-quality hose, hose ends, adapters and even installation tools.
Today, we’re looking at the different styles of Mr. Gasket hose available, and when to choose one over the other for your project.
Read MoreLife's Good: Bill Alvis' Wild Blown Nitrous S-10
| 01/15/2019He's had a lot of different engines in the truck, but never one like this.
Read MoreHolley EFI 12.3" Pro Dash
| 01/15/2019Sema’s Best engineered product just got bigger and better! Holley’s large 12.3” Pro Dash allows you to monitor engine parameters at a glance and custom tune with your finger tips. There’s even a virtual switch panel to control your accessories. The Pro Dash is a must have for any Holley EFI system.
Read More
Suspension Engineer
| 01/14/2019This position will support the activities of Holley Performance Products by designing various suspension components, sub-assemblies, and assemblies. This individual will work to achieve and will be expected to fully design a prospective product with only rough guidelines of definition. Individual duties include but not limited to designing concept, testing and hands on installation. This individual is expected to possess expert skill with ProEngineer and SolidWorks software, and to be able to quickly create high-quality designs with only minimal instruction and supervision. This individual will be focusing a majority of their time generating conceptual designs / models thru delivering completed, detailed prints and feature specifications.
Read MoreTurbo or AC? - Mark Siders' LS Powered 1963 Volkswagen Beetle - Holley LS Fest
| 01/14/2019Mark Sider had the choice between Turbo or AC on his 1963 Volkswagen Beetle. We think he made the right choice.
Read MoreRiley Stair's Holley EFI-Powered '70 Pontiac Trans Am Has to Be Seen to Be Believed
| 01/14/2019
Read More
Holley EFI Releases a Large Assortment of New Components
| 01/11/2019Choose from high-flow dual-port boost-control kits, current transducers, EV6 unterminated injector harnesses, unterminated flying-lead main harnesses, and 1/8-NPT sensor blocks.
Read More
Ringbrothers Rule SEMA Show Again With Holley EFI-Powered '71 Blazer
| 01/11/2019The incomparable brothers from Wisconsin take on their first 4x4 build.
Read MoreHow to setup the MSD ARC Module for Power Grid
| 01/10/2019The ARC module stands for Advanced RPM Control, it basically allows your race car to remain consistent, pass after pass, controlling your engines rpm curve during a pass. This helps you get down the track quicker and far more consistent. By using the MSD View software we can control the rpm down to a hundredth of a second and control the driveshaft speed for maximum traction. Jump in to find out how it's done.
Read More
