Delta Force Performance Air Intake & American Thunder Axle-back for 2010-15 Camaro w/3.6L

By: Dale Dotson | 03/11/2019 < Back to Motor Life Home

Camaro Products Featured in this Video

Part #615104 - Flowmaster Delta Force Performance Air Intake

Part #817483 - Flowmaster American Thunder Axle-back Exhaust

Flowmaster Part #615104


Fits 2012-15 Chevy Camaro LS/LT with 3.6L engine


Take the performance of your vehicle to the next level with the addition of Flowmaster's new Delta Force Performance Air Intake system for 2012-15 Chevrolet Camaro LS/LT with 3.6L engine. The Delta Force system contains an ultra-trick looking, custom molded black Cross-Linked Polyethylene (XLPE) high-flow intake tube, black anodized aluminum fittings (when applicable), high quality reinforced silicone couplers and all stainless steel hardware. Other features include a large diameter high-flow conical shaped 8 layer cotton gauze air filter, which traps more dirt than typical 6 layer designs, a custom-fit black powder-coated air dam with attachment brackets (when applicable) to securely mount the system in place along with soft bumpers to eliminate any metal to metal contact under the hood. The Delta Force Air Filters are serviceable with our new Delta Force cleaning kits which will help outlast your vehicle. For maximum performance and that iconic Flowmaster? exhaust tone, we highly recommend pairing your new Delta Force Performance Air Intake with a Flowmaster exhaust system. This product is NOT legal for use or for sale in the state of California.

-No Tuning Required

-Up To 7% Power Gains In HP and TQ

-No Cutting or Drilling For Easy Installation

-Serviceable Lifetime High-Flow 8 Panel Cotton Gauze Filter


Flowmaster Part #817483


Fits 2010-15 Chevrolet Camaro LS/LT with 3.6L engine. Does not fit convertibles


Enhance the power, the sound and the look of your 2010-15 Camaro LS/LT 3.6L engine with this American Thunder Axle-back exhaust system. Features include all mandrel-bent 2.50-inch stainless steel tubing, a pair of Super 44 mufflers and uses the factory hanger locations. The system is then finished off with a pair of highly polished 4.00-inch stainless steel tips embossed with the Flowmaster logo and has a deep aggressive exterior tone with a moderate interior sound level. Includes easy to follow instructions and all necessary hardware for an easy at home installation. Note: Requires cutting of the factory system. Does not fit Convertible.

-Large 4.00-inch Polished Stainless Steel Tips

-Deep Aggressive Exterior Exhaust Tone

-Uses the Factory Hanger Locations

-Stainless Steel Construction

For more information on Flowmaster exhaust products, contact our Customer Support team at 707-544-4761 or visit our website

Featured Products
     X  Holleydays 2020 Free Shipping
     X  Holleydays 2020 Free Shipping