How To Install Mr. Gasket Fabricated Valve Covers on a Gen 3 HEMI
Under the Hood of an LS-Swapped, Turbocharged, Honda S2000 Packing 700 Horsepower| 08/03/2020
Holley employee, Mason Whitlow swore he would never LS swap his Honda S2000. But, after years working in Holley’s technical trenches learning the ins and outs of LS products and power potential, he caved, swapping in a mean, 707-wheel-horsepower, turbocharged LS engine.
Mr. Gasket Electric Fuel Transfer Pump For Fuel Drums| 02/20/2020
Mr. Gasket has expanded their tool lineup with this awesome new transfer pump! The perfect solution for racers using 15-55 gallon drums for storing fuel, this electric powered transfer pump plugs into any 120V outlet and outputs up to 4.2 gallons per minute. The suction pipe telescopes from 33.5 to 49 inches allowing one pump to be used on metal or plastic drums; it'll even fit some IBC (intermediate bulk container) totes!
How to Add Nitrous to Your LS-Powered Vehicle| 11/25/2020
Adding nitrous to an LS is easy and there are a multitude of ways to do it. In this power-packed segment, we'll show you how to add an NOS nitrous kit to your LS engine.
Family Heirloom: Eric Marcoccio’s 1968 Plymouth Barracuda| 11/25/2020
Following a long stint as the family hauler, this ’68 Cuda was put in storage, later resurrected, and then parked for another extended stay under wraps. Now, after years of patient planning and restoration work, this remastered fish is poised to reclaim its stomping grounds.