NOS Dry Nitrous Plate for Holley Hi-Ram LS Manifolds
A well-planned nitrous system is like a knuckle sandwich when it comes to delivering power and the NOS Dry Nitrous Plate for Holley Hi-Ram intake manifolds makes things easier when adding nitrous to your Hi-Ram equipped engine.
Installing between the upper and lower halves of the Holley Hi-Ram intake manifold, this one-piece plate is machined from 6061-T6 aluminum, and is available in ether a clear or black anodized finish to match your particular Hi-Ram, ensuring that it will look great for a long time.
The plate features a machined passage feeding eight openings per intake runner, designed to spray precisely into the center of each cylinder. As the passages are machined directly into the plate, there’s no need to worry about spray bars breaking or coming out of alignment. The plate comes equipped with jetting for up to 250 horsepower in 50 horsepower increments, and is capable of supporting 1000+ horsepower, using separately-purchased jets.
The NOS Dry Nitrous Plate for Holley Hi-Ram intake manifolds are available in clear or black anodized finishes and include the gasket, hardware, jet holders and jetting, again, for up to 250 horsepower.
You can find this and many more high-quality parts to build your nitrous knuckle sandwich over at NOSnitrous.com
NOS Releases Dry Nitrous Plates For Holley Hi-Ram LS Intake Manifolds| 02/27/2019
They bolt up between the top plate and bottom base plate on two-piece Holley Hi-Ram LS manifolds and can easily handle up to 1000 horsepower.
Life's Good: Bill Alvis' Wild Blown Nitrous S-10| 01/15/2019
He's had a lot of different engines in the truck, but never one like this.
Tubbed Muscle Cars and Blown Engines - Holley Hot Rod Reunion| 06/25/2019
Check out some of the cool rides we saw at Holley NHRA National Hot Rod Reunion!
"I Built It To Drive" - Dustin Meyer's 1952 Chevy Sedan| 06/25/2019
Check out our interview with Dustin Meyer at LS Fest West 2019