Carburetor Installation And Tuning Blog
How To Adjust Holley Carburetor Vacuum Secondary Springs
| 12/02/2009Holley offers some tips on how to properly operate and adjust four-barrel carburetors with vacuum secondary throttle blades. The video describes the various rate secondary springs, how to change them, and the testing procedures to follow to make sure the secondaries open properly for best performance.
Read MoreHow To Replace Your Engine's Intake For Using A Holley 4bbl Carb
| 12/02/2009Which intake you should use when using a Holley four-barrel carburetor. Matching the intake to the carburetor is key when upgrading to a Holley carburetor. This videos shows you the various options.
Read MoreHow To Diagnose A Hard Starting Hot Engine
| 12/02/2009Holley offers tips on diagnosing hard starting engines that are already at proper operating temperatures. Some of the tips covered here are fixing vapor lock, fixing a binding or sticky choke, checking float levels, fuel percolation, and checking the accelerator pump system.
Read MoreSetting The Transmission Kickdown On TH-350, TH400, And 700R4
| 12/02/2009Holley offers tips on properly setting up the transmission kickdown levers on GM Turbo Hydro 350 and 400 automatic transmissions. The video also demonstrates how to properly set the throttle valve, TV cable.
Read MoreSpread-Bore Carbutetor Performance Upgrade Options
| 12/02/2009Holley offers various options to replace your square-bore (Quadrajet) carburetor for a Holley spread-bore carburetor. You can also perform a spread-bore to square-bore swap.
Read MoreAttaching Early GM Throttle Linkage To Holley Carbs
| 12/02/2009There are various types of throttle linkages on early GM cars that attach differently to a Holley carburetor. Here are some tips to attach a variety of GM model throttle cables with different transmission applications.
Read MoreHow To Set The Curb Idle Speed On Your Holley Carburetor
| 12/02/2009Easy tips on how to set the curb idle speed on your Holley carburetor. These tips show how to set the idle speed on both manual and automatic transmission equipped vehicles.
Read MoreTroubleshooting - backfire through carburetor
| 12/02/2009Footage taken from Holley Carburetor Installation & Tuning DVD
Read MoreTroubleshooting - engine starts and stalls
| 12/02/2009Footage taken from Holley Carburetor Installation & Tuning DVD
Read MoreHow To Adjust The Secondary Speed Screw On Holley Carbs
| 12/02/2009How to properly adjust the secondary speed screw on Holley carbs. This procedure is only used on engines with large duration camshaft that have very low vacuum at idle.
Read More
