Intake Manifold Blog
Holley Releases New Single Plane Split Intake Manifolds for GM LS3/L92!| 11/11/2019
Holley has expanded their line-up of race oriented split-design intake manifolds by releasing two new LS3/L92 versions! A 4150 carbureted version gives consumers the ability to go old school and provide an option for a high-winding performance intake that doesn't break the bank! Meanwhile the EFI version also includes the 4150 bolt flange allowing racers to use a variety of throttle body and intake elbow combinations. Click here to learn more!
Sniper EFI Releases Fabricated Hemi Intakes & Race Series Hemi Intakes| 09/11/2019
Both are available in your choice of a stealth black or shiny finish.
MSD Releases Atomic Billet Fuel Rails and LS/LT Atomic AirForce Intake Manifolds in Black & Gray| 07/03/2019
They're available in two versions – just the fuel rails themselves or in complete kits with all the hardware to plumb the system.
Holley Releases Single-Plane Split-Design Race Intake Manifold| 03/27/2019
They're lighter than ordinary split race intakes and cost one-third to one-half as much.
NOS Releases Dry Nitrous Plates For Sniper EFI Fabricated LS Intakes| 02/28/2019
They "sandwich" between the top plate and bottom base plate and spray through eight .040-inch openings into the center of each intake runner for optimum distribution and max power.
NOS Releases Dry Nitrous Plates For Holley Hi-Ram LS Intake Manifolds| 02/27/2019
They bolt up between the top plate and bottom base plate on two-piece Holley Hi-Ram LS manifolds and can easily handle up to 1000 horsepower.
Miller Finishes 2nd at King of the Hammers in First Start With MSD AirForce intake| 02/15/2019
10-year veteran earned his third podium finish in the past four years.
Holley EFI Releases Black 351W Hi-Ram Manifolds| 11/15/2018
Two versions are available – one for 95mm throttle bodies and one for 105mm throttle bodies.
Sniper EFI Releases Dual Plenum Intake Manifolds For LS Engines| 11/05/2018
They're available for both cathedral-port and rectangular-port heads, and both versions increase airflow and improve dispersion to the intake ports.
Holley Releases Single Plane Split-Design Race Intake Manifolds| 10/22/2018
They're made just for high-performance and race Gen III LS engines with cathedral port heads and 4150-style square-bore flanged carburetors or throttle bodies.