650 CFM Mechanical Street HP Carb
Holley is proud to announce the availability of their 650 CFM Mechanical Street HP carburetor, P/N 0-82651. The Street HP uses the best features from the race Bred 650 CFM 4150 HP carb, but tamed for street use.
The Mechanical Street HP uses the contoured main body from the 4150 HP and adds a tumble polishing for a shiny finish. The metering system includes a timed spark port and is calibrated for a hot street/strip engine setup for outstanding throttle response and driveability. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
Other features include fourth generation power valve design, power valve blow-out protection, non-stick gaskets, clear sight plugs, built in secondary fuel filter system in primary and secondary fuel bowls, adjustable air bleeds, two corner idle system, Ford kick-down and down-leg boosters.
For more information contact Holley Tech Service, P.O. Box 10360, Bowling Green, KY 42102-7360. Telephone 270-781-9741. For nearest dealer: 1-800-HOLLEY-1. Or visit us on our web: www.holley.com.
New Full Line of Hooker BlackHeart Exhaust Systems for Toyota FR-S and Subaru BRZ| 01/13/2017
Lighter, stronger, and more corrosion-resistant than ordinary OE exhaust systems!
NOS Releases Wet Nitrous Kits in Black For GM LS Drive-by-Wire 90/92 & 100/105mm Applications| 02/06/2019
They're designed specifically for drive-by-wire applications and capable of supporting up to 250 rear-wheel horsepower.
Install Video: Deboss Garage Demonstrates Just How Easy Sniper EFI Really Is to Set Up| 02/19/2019
Watch step by step as "Filthy Rich" Bosch upgrades a '67 Goat to electronic fuel injection.
How To Install Mustang 255 LPH OE Style EFI Holley Fuel Tank Modules| 02/19/2019
For our blue oval fans, I’m going to show you how easy it is to install one of Holleys OEM style EFI Fuel tank module with a 255 LPH fuel pump!