New XDR Competition Exhaust System for Polaris RZR XP1000
This bolt-on XDR Competition exhaust system is for the 2015-17 Polaris RZR XP 1000 and XP4 1000 with naturally aspirated engine. The system connects at the factory flanged connection and is firmly held in place using the factory rubber mounts and springs. Features include 409S stainless steel construction, a 2.50-inch mandrel-bent inlet tube flowing into the "straight-through" cross-flow XDR Competition muffler by Flowmaster, providing a deep moderate to aggressive sound level. The dual 2.25-inch mandrel-bent tailpipes are tucked up high within the rear fenders and are finished off with a pair of 3.50-inch brushed 304s stainless steel tips with black anodized aluminum end caps. The system comes with a custom black powder coated heat shield sporting a laser-cut XDR logo in the shield showing everyone behind you why you're RZR sounds so good. Includes all necessary hardware and detailed instructions for a simple at home installation. Note: This system does not include a catalytic converter and therefore is not emissions compliant for on-road or trail use. For Competition use only.
• High Clearance Dual Tailpipes
• Moderately Aggressive Deep Sound
• Full Stainless Steel Construction
• XDR Off-Road Lifetime Limited Warranty
Trick New Dual Gate UTV Shifters| 06/10/2019
Check out these trick New dual gate UTV shifters from XDR Off-Road with two models available to cover the Polaris RZR XP models and the Can-Am Maverick X3 models. These unique new shifters combine both a gated design, and a "Hill Killer" gate plate in one easy to use shifter.
Outlaw Axle-back Exhaust System for 2015-19 Mustang Ecoboost & 3.7L| 06/17/2019
Check out the new Outlaw Axle-back exhaust system for 2015-19 Mustangs with the 2.3L Ecoboost or 3.7L V6 engines.
Hot New XDR Off-Road Competition Exhaust for Polaris RZR XP1000| 06/18/2019
In this video you will get to hear the deep powerful sound of the hot new XDR Off-Road Competition exhaust system for 2015-17 Polaris RZR XP1000 EPS 2/4 door models.
How to flip Racepak G-Meters| 06/18/2019
When mounting a Racepak data logger there are specific mounting instructions that are needed to be followed in order for proper G-Meter readings. But what if those mounting instructions won't work in your application?