NOS Billet Solenoid and Micro Switch Brackets
Nitrous Oxide Systems is announcing the availability of their billet solenoid and Micro Switch Brackets designed to fit square flange (Holley Model 4150) and Dominator Flange (Holley Model 4500) carburetors.
Each bracket is CNC machined from Billet aluminum, black anodized and laser engraved. These brackets provide a simple solution for mounting solenoids and micro switches that will not flex or bend allowing for consistent activation of your nitrous system every time (does not fit Powershot or Super Powershot solenoids).
Solenoid brackets, micro switch brackets are available individually: P/N 16512NOS 4150 Micro Switch Bracket, P/N 16514NOS 4500 Micro Switch Bracket, P/N 16515NOS 4150 Solenoid Bracket, and P/N 16517NOS 4500 Solenoid Bracket; or in a combination solenoid bracket and throttle cable mounting system for the ultimate setup: P/N 16516NOS 4150 Solenoid Bracket with Throttle Cable Mounting System or P/N 16518NOS 4500 Solenoid bracket with Throttle Cable Mounting System.
For more information contact Nitrous Oxide Systems, 1801 Russellville Rd. Bowling Green, KY 42101, Telephone 270-781-9741. For nearest dealer: 1-800-HOLLEY-1. Or visit us on the web: www.nosnitrous.com.
Holley Unveils 4-Bolt Throttle Body Nitrous Plate Kits For GM LS Engines| 03/24/2017
Available for 4-bolt, drive-by-wire, and cable-operated throttle bodies
Holley Releases 1, 2, and 3-Stage NOS Dry Fogger Nozzles| 04/13/2017
There's something for everything from a 10-second bracket car to a Pro Mod!
How to Use Mr. Gasket's GM LS Alignment Tools| 02/19/2018
Three versions are available – one for timing covers with a seal, one for timing covers without a seal, one for and rear covers.
Holley Releases NOS Complete Mopar Nitrous Plate Systems| 02/12/2018
They support up to 250 rear wheel horsepower for 2005-2016 Dodge Challengers, Dodge Chargers, and Chrysler 300Cs.