Weiand Action +Plus™ Vortec Intake manifold
Weiand is proud to announce the availability of their new Action +Plus™ dual plane intake manifold for small block Chevy engines with 1996 and later Vortec (L31) iron heads, P/N 8121. The 8121 Action +Plus intake is the start of a new era in power for Weiand. Dyno testing of the new Weiand 8121 Action +Plus intake found an additional 25 peak horsepower and 23 lb. ft. over the competitions existing intake design. All this additional power is the result of using the latest in computer design, modeling and flow analysis with new manufacturing processes.
Weiand’s 8121 intake uses a permanent mold casting process for a lighter and more consistent casting resulting in runners that are smoother for better fuel atomization and distribution to the cylinders. Each casting is fully CNC machined to give an exact fit and exact port match to the heads with ports measuring 2.02” H and 1.05” W. The 8121makes best power from idle to 5500 RPM’s while giving excellent hood clearance with a front height of 3.38” and a rear height of 4.50”.
The Weiand Action +Plus 8121 is available in three finishes, satin P/N 8121, hand polished aluminum P/N 8121P and the new Everbright™ finish P/N 8121C. The Everbright™ finish has the look of polished aluminum and the durability of powder coating. It is low maintenance with no polishing required and will not be affected by heat or gasoline spills.
For more information contact Holley Tech Service, P.O. Box 10360, Bowling Green, KY., 42101-7360, Telephone 270-781-9741. For nearest dealer: 1-800-HOLLEY-1. Or visit us on the web: www.weiand.com.
New Full Line of Hooker BlackHeart Exhaust Systems for Toyota FR-S and Subaru BRZ| 01/13/2017
Lighter, stronger, and more corrosion-resistant than ordinary OE exhaust systems!
Holley Releases NOS Complete Mopar Nitrous Plate Systems| 02/12/2018
They support up to 250 rear wheel horsepower for 2005-2016 Dodge Challengers, Dodge Chargers, and Chrysler 300Cs.
Save Money and Time With Mr. Gasket Releases Cam Change Gasket Kits| 02/21/2018
Three different kits are available – one for LS1/LS2/LS6 engines, one for LS3/L92s, and one for LS7s.
How to Use Mr. Gasket's GM LS Alignment Tools| 02/19/2018
Three versions are available – one for timing covers with a seal, one for timing covers without a seal, one for and rear covers.