Ignition Troubleshooting Blog
Universal Wire Set Installation Instructions| 04/01/2018
Universal Wire Set Installation Instructions. Read Carefully Before Starting Installation/
MSD Tech: Coil and Spark Plug Wire Troubleshooting| 11/14/2013
There are not a lot of things that you can check to confirm that the coil is operating. Also, due to the number of different coil variations available, it makes it difficult for specific specifications. If you have an ohm meter, you can check the primary and secondary resistance of the coil.
MSD Tech: Distributor Troubleshooting| 09/15/2012
MSD offers several different styles of Pro-Billet Distributors, so our first step is to identify which model you have.
MSD Tech: Ignition Troubleshooting| 12/03/2011
The following information will give you some tips to review during the installation of your MSD 6-Series Ignition Control. We will start by reviewing the wiring of the MSD ignition control.
How to test for spark on your MSD 6 Series| 07/27/2011
Watch as Silver Gomez shows us how to test for spark on MSD Ignition's 6 series ignitions.
"Installing a Distributor", a How To Video from Mallory| 03/25/2011
Watch as Accel Engineer John installs a Mallory Ignition on a small-block Chevy engine. This video also provides simple steps to make sure you're on the right track, such as aligning your distributor gear drive with the oil pump drive and aligning your spark plugs based on your distributor's installation.
5462 To Mallory Unilite| 03/21/1999
This diagram illustrates how to install a 5462 BTM timing controller with a Unilite distributor.