Flowmaster Releases New Delta Force Air Intakes for Late Model Trucks!| 12/30/2019
Flowmaster is pleased to announce the release of two new air intake systems for late model pickups! Designed with performance in mind, these new systems will fit 2017-2019 Ford F250/F350 Trucks (6.2L Engine) and 2017-2019 Nissan Titan 5.6L V8 Engines. The Delta Force® system includes an easy bolt-on installation with no cutting or drilling. CLICK HERE TO LEARN MORE!
Sniper Dual Plenum Fabricated Intake Manifolds for LS Engines| 12/17/2019
Holley continues to push the envelope of intake design with its latest offering. The unique look of this intake will surely stand out from the crowd!
Hotrod Your Gen III Hemi With Help From Holley!| 12/12/2019
Have you been dreaming of swapping a late model Hemi into your next project? The Holley family has you covered with a ton of parts for the Gen III elephant including new Terminator X fuel injection, bell housings, headers, fabricated sheet-metal valve covers and race-series intakes. Click here to learn more!
Holley Releases New Single Plane Split Intake Manifolds for GM LS3/L92!| 11/11/2019
Holley has expanded their line-up of race oriented split-design intake manifolds by releasing two new LS3/L92 versions! A 4150 carbureted version gives consumers the ability to go old school and provide an option for a high-winding performance intake that doesn't break the bank! Meanwhile the EFI version also includes the 4150 bolt flange allowing racers to use a variety of throttle body and intake elbow combinations. Click here to learn more!
Sniper EFI Releases Fabricated Hemi Intakes & Race Series Hemi Intakes| 09/11/2019
Both are available in your choice of a stealth black or shiny finish.
Gregg Hamilton Has Built Not One But Two of the Coolest Firebirds You'll Ever See| 07/16/2019
They're couldn't be less alike – one's a '71 Firebird that would have been right at home in the movie "Mad Max" and the other is a '79 Trans Am cooler than the one from "Smokey & the Bandit."
Holley Releases Single-Plane Split-Design Race Intake Manifold| 03/27/2019
They're lighter than ordinary split race intakes and cost one-third to one-half as much.
NOS Releases Dry Nitrous Plates For Sniper EFI Fabricated LS Intakes| 02/28/2019
They "sandwich" between the top plate and bottom base plate and spray through eight .040-inch openings into the center of each intake runner for optimum distribution and max power.
NOS Releases Dry Nitrous Plates For Holley Hi-Ram LS Intake Manifolds| 02/27/2019
They bolt up between the top plate and bottom base plate on two-piece Holley Hi-Ram LS manifolds and can easily handle up to 1000 horsepower.
Miller Finishes 2nd at King of the Hammers in First Start With MSD AirForce intake| 02/15/2019
10-year veteran earned his third podium finish in the past four years.