Flowtech 2005 Mustang GT Headers
Flowtech is proud to announce the availability of their 2005 Mustang GT headers, P/N 12116FLT The 12116FLT is a tuned length long tube header for off-road use only.
The 12116FLT headers utilized lightweight 16 gauge 30” tuned length 1-5/8” primaries merging into a 6” long 2.5” slip fit collector for a simple, leak-free installation. Thick 3/8” machined flanges result in a perfect leak free seal against the cylinder heads. All emission control fittings are included for easy installation, including the O2 sensor extensions. Not included are O2 simulators for the rear sensors.
Installed these headers result in minimal ground clearance loss over stock and work with the factory H-pipe. Installation is a snap, since these headers can be installed from underneath with only disconnection of the O.E. steering coupler.
Flowtech’s 12116FLT header comes finished with a baked on high heat resistant black paint or for a show look Flowtech also offer’s the 12116FLT header with a Metallic Ceramic Thermal Barrier Coating, P/N 12116-1FLT.
For more information contact Holley Tech Service, P.O. Box 10360, Bowling Green, KY, 42101-7360, Telephone 270-781-9741. For nearest dealer: 1-800-HOLLEY-1. Or visit us on the web: www.flowtechheaders.com.
New Full Line of Hooker BlackHeart Exhaust Systems for Toyota FR-S and Subaru BRZ| 01/13/2017
Lighter, stronger, and more corrosion-resistant than ordinary OE exhaust systems!
Flowtech Releases Non-Muffled Axle Back Exhaust Kits For Camaro & Mustang| 01/03/2019
They deliver an aggressive sound, factory-like fitment, and maximum performance for 2.0/3.6L 2016-18 Camaros and 5.0L 2011-14 Mustangs.
Holley EFI 12.3" Pro Dash| 01/15/2019
Sema’s Best engineered product just got bigger and better! Holley’s large 12.3” Pro Dash allows you to monitor engine parameters at a glance and custom tune with your finger tips. There’s even a virtual switch panel to control your accessories. The Pro Dash is a must have for any Holley EFI system.
Life's Good: Bill Alvis' Wild Blown Nitrous S-10| 01/15/2019
He's had a lot of different engines in the truck, but never one like this.