Sniper EFI Initial Startup and Troubleshooting
How to install the easy to use Sniper EFI Hyper Spark Ignition System| 06/12/2018
Holley's EFI Hyper Spark Ignition system is a plug and play system for Sniper EFI. Along with easy of installation and wiring, the new clear cap installation tool makes indexing your distributor a breeze. Follow along as we show you how easy it is to configure and install the Sniper Hyper Spark Ignition system.
Sniper EFI Installation Guide| 02/25/2020
So you're ready to switch from carburetor to fuel injection, but you're unsure of what all is involved. This guide will walk through a basic installation including what parts are necessary to swap as well as what to watch out for. CLICK HERE TO LEARN MORE!
GRIDLIFE's 2021 Elkhart Color Classic: Setting Records At The Season's End| 10/15/2021
GRIDLIFE's 2021 Elkhart Color Classic ends the series' 2021 season. And what an ending! Feras Qartoumy's 2.04.877 lap broke the record for a production car with his Corvette.
Holley LS Fest 2021: Home-Built, Turbocharged Holden HX 1 Tonner Combines Practicality and Speed| 10/15/2021
Chris Hanifan is an Aussie proudly turned American. But his 1976 Holden HX 1 Tonner shows just a bit of his down-under roots remain. The home-built car packs a 170k-mile, 5.3L short-block, with a turbocharger, Holley terminator X ECU, and a whole ‘lotta grunt. It runs 10.50 at 130mph in the quarter, but Hanifan is chasing 200mph.