Sniper Efi Videos Blog
Sniper EFI Installation Guide| 02/25/2020
So you're ready to switch from carburetor to fuel injection, but you're unsure of what all is involved. This guide will walk through a basic installation including what parts are necessary to swap as well as what to watch out for. CLICK HERE TO LEARN MORE!
Sniper EFI Initial Startup and Troubleshooting| 01/20/2020
If you're installing a Sniper EFI system and almost ready to crank it over for the first time, this is the video for you!
How To Properly Place and Install an O2 Sensor| 11/27/2018
Tom Kise talks about oxygen sensors and where to place an 02 sensor bung in your exhaust and how to properly install them. o2 sensor placement is critical for getting your engine to read the oxygen in the exhaust correctly.
How to install the easy to use Sniper EFI Hyper Spark Ignition System| 06/12/2018
Holley's EFI Hyper Spark Ignition system is a plug and play system for Sniper EFI. Along with easy of installation and wiring, the new clear cap installation tool makes indexing your distributor a breeze. Follow along as we show you how easy it is to configure and install the Sniper Hyper Spark Ignition system.
How To Take A Data Log From Your Sniper EFI System| 08/14/2017
Someday you may need to take a data log from your Sniper EFI system. Today I'm going to discuss two different ways you can take a data log using your 3.5" LCD and the Sniper PC software. How to open them using the Sniper software and how to e-mail them to somebody for review.
How To Load A Global File, Step By Step| 03/17/2017
It's a lot easier than your probably think!
Automotive Wiring: "Good Enough" Is Anything But!| 02/21/2017
You might know what to do – here's what NOT to do!