XDR Off-Road Competition Exhaust System for 2018 Polaris RZR RS1 1000 models| 03/05/2019
The new XDR Competition single exhaust system utilizes full 304S stainless steel construction, slips on the factory flange inlet connection and is firmly held in place using the factory rubber mounts and springs.
Dan Rockwell's 1968 Ford Mercury Cyclone - Holley Hot Rod Reunion| 03/05/2019
There are only a few Ford Mercury Cyclones left around today. Dan has had this one for ten years, and he's been making improvements to it along the way.
Flowmaster American Thunder Cat-back Exhaust - 2019 GM 1500 with 6.2L| 03/04/2019
2019 Chevrolet Silverado 1500 and GMC Sierra 1500 Crew Cab and Double Cab models with 6.2L V8 gas engine.
ACCEL Releases Extreme 9000 Black Ceramic Boot Ignition Wire Sets| 03/04/2019
They're perfect for cramped engine bays and anytime space is tight around red-hot exhausts and come in in 10 different variations.
How To Choose: NOS Black Powershot, Super Powershot & Big Shot Nitrous Systems| 02/28/2019
If you’re looking to increase your engine's horsepower, there’s no better way than with a Powershot, Super Powershot, or a Big Shot nitrous kit from Nitrous Oxide Systems! With kits offering performance gains from 100hp to as much as 300hp who could argue?
NOS Releases Dry Nitrous Plates For Sniper EFI Fabricated LS Intakes| 02/28/2019
They "sandwich" between the top plate and bottom base plate and spray through eight .040-inch openings into the center of each intake runner for optimum distribution and max power.
How to Choose The Right Clutch| 02/27/2019
Once you start modifying your vehicle for more power and performance, your stock clutch will eventually not have enough clamping force causing your clutch to slip. Choosing the correct performance clutch for your combination will ensure you get all that power to the rear wheels.
2018-19 Jeep Wrangler JL - B&M SportShifter & Transfer Case Handle| 02/27/2019
The B&M Precision SportShifter for the 2018-19 Jeep Wrangler JL (2 and 4 door) with 6-speed (AL6) manual transmission features a 303 stainless steel stick with an anodized aluminum pivot reduces the shift throw by 18% over the factory shifter.
NOS Releases Dry Nitrous Plates For Holley Hi-Ram LS Intake Manifolds| 02/27/2019
They bolt up between the top plate and bottom base plate on two-piece Holley Hi-Ram LS manifolds and can easily handle up to 1000 horsepower.
How To Get Your Car to Spool Faster with Holley EFI Boost Builder| 02/27/2019
Ryan Witte walks us through Holley EFI's Boost Builder and shows us how to get your car to spool faster with Holley EFI!