In the works

More Info to follow

Chassis wiring harness is complete. NOW I can start the install on the terminator x wiring harness on the engine. I had to make sure the buggy has all the basic chassis wiring to support the Terminator X system

The MSD universal crank trigger system was sent out to a machinist to mount the trigger wheel to the harmonic balancer using a solid chunk of 4" diameter T6061 billet aluminum to go off of.

I will then have to fabricate a bracket from scratch so I can mount the MSD trigger signal bracket to. Yes, I have to fab up a bracket to mount a bracket.

So in the middle of waiting, I will continue the push forward to hopefully firing this motor up without the turbo at first.