Skip to main content
ASK OUR EXPERTS
1-866-464-6553
Report

Adding Tach with MSD 8913 adapter

By: Tom 05/17/2020

Ok, so I don't have the Tach permanently installed yet. And you say why add a Tach when the cluster has one? Well its to low! I need the Tach up higher where I can see it and my UZ-FE engine idles so quite that I cant tell if the truck is even running. If you have a UZ engine you know what I mean. Well here is some info on how I added the MSD-8913 Adapter for engines with coil packs. The MSD-8913 essentially gets spliced into the B+ (12V) powerfeed that is shared to all the coil packs. The coil packs have four wires, B+ (12V), Gnd, Trigger, and Feedback. So here you go Tundra Owners...

3CDC1DFA-A685-4127-A376-80F5A7D4AE9E.jpg


ADCF5ED8-83A2-47CE-A3F0-F4FBFD39BF2E.jpg


C9825B28-CBAD-435F-8B38-506B72E05DF1.jpg


477FAD33-5B35-406A-A48A-84179C727D6B.jpg


D95AA222-8FCF-4C84-93F2-FEAE4CE785F9.jpg


Completed Modifications

Data Acquisition (1)
Back to Ride