MENU
Share
Report

Front Shock Towers

By: Michael 08/31/2019

To strengthen the front shock towers, reinforcement plates (Part# 12-3008) cut from 1/8” steel were welded in place at an angle on the inside lower portion of the shock towers.  The welding in of these plates will create a sealed cavity that was pre-treated with epoxy primer before welding.  Once reinforcement plates were welded in place the entire front clip received a coating of epoxy primer surfacer to begin the sanding and surfacing process.  Finally, a gloss black urethane finished was applied.    

ADC7AD86-06C9-4440-8DA9-75518D5D4701.jpg

339AE9DC-0481-4E1F-9BDC-753E84DB2409.jpg

86174353-D926-433D-8196-923F09FA716A.jpg

9A462FF3-2D8B-417E-9556-CE2D82229C97.png

0279157B-7F98-4B4B-BA42-43F2477C7BD8.png

Back to Ride