1972 Chevrolet Chevelle

Brake Adapter Thread Size -4AN To 1/2"-20 Inverted Flare Male - 2 Per Package - Steel w/ Electroless Nickel Plating.

14.00" Electric Fan Puller Style High Performance 1623CFM 10-blade straight style blade

Fits GM/Ford/AMC, Chrysler Slant 6 and 1979-1989 Mopar 318, 360 V8

SPAL® 9.00" Inch Electric Fan Puller Style Low Profile 590 CFM 10 Straight Style blades

Compatible with 1968-1972 Chevrolet Chevelle - Pro Series

Cap Brushed

E85 Checker - FOR E85 FUEL ONLY

2.125" 8-magnet aluminum split collar.

Cable to extend V-Net connections.

The Universal EFI Interface Module streams CAN-based data from aftermarket ECU systems to Racepak's V-Net System.

This module communicates with Racepak's Virtual Dash App, turning your wireless device into a virtual IQ3 dash.

1/8-27 NPT SENSOR BLOCK

The Sportsman data acquisition system is designed to meet all of the needs of the sportsman drag racer, including their budget. This compact recorder provides up to 25 channels of data. Comes with DataLink Software.

Four V-Net channel upgrade for the Sportsman Data Logger. ***Requires System ID and current number of channels from Sportsman***

Cable to extend V-Net connections.

Universal 3 & 4-speed Compatible Shifter

Universal - Tune Ignition Curve or Boost Timing Map from PC

Clean up your wiring with an MSD Solid State Relay Block.

3/4"-16 thread Hall effect sensor.

5-inch High-Resolution Display - GPS Speedometer - Built-in Handheld Wizard

High-Current Solid-State Relay 35 Amp per channel up to 140 Amp continuous

This is our most popular performance distributor. Must be used with an MSD 6, 7 or 8-series ignition.

Universal - Add To Any MSD 6-Series Ignition

Hot Street/Race Carb or EFI Applications Pre Filter 100 Micron

Hot Street/Race EFI Applications Post Filter 10 Micron

Fits 175, 260, and 460 GPH VR Series Billet Fuel Filter and EFI Filter/Regulator. 50.3 mm I.D. Mounting Bracket Thru-Bolt Holes: c/l to c/l = 3.150" & use w/ 1/4" Mounting Bolts. The threaded mounting holes in the bracket are M6-1.0 Mounting Bolt Holes: c/l to c/l = 3.150" & use w/ 1/4" Mounting Bolts. Each Bracket is 1/2" thick by 3.750" Wide.

Set includes terminals for engines with early type (socket) and late type (HEI "spark plug top") distributor caps. Multi-angle boots and terminals factory installed on one end. Supplied with two 56", two 50", two 48" and three 32" wires.

This Alternator features 120 AMPS and a black finish for subtle appearance!

The Firewall Feed-Thru provides 1/2 inch of insulation to ensure that the coil spark reaches the distributor.

Supports Up To 1500HP - 3.5 in. Handheld Monitor - 8x100 LB/HR Injectors

The Rotor is based on MSD's popular PN 8467 Race Rotor.

These spark plug boots are designed for extreme racing applications.

High Current Nitrous Solenoid Driver

Double-Ended Hose End Wrench, Hex Size 7/8 x 3/4, 8 Nut-6 Socket, Blue

Double-Ended Hose End Wrench, Hex Size 1 x 7/8, 10 Nut-8 Socket, Purple

Fits 260 GPH HP Billet Fuel Filters 10 Micron

Fits 260 GPH HP Billet Fuel Filters 100 Micron

Black - XL

Black - XL - Shoe Size 12-13

Black - XL

Black - Medium Tall

XX-Large - Black

Platinum - 3 in. Lap and Shoulder - 2 in. Sub

12 - Black

Black - Adult - 10 in. to 15 in. Forearm

Black - XL

Black - Medium

.625" (5/8) Aluminum Wheel Spacers-5x4.25, 4.50, 4.75