Build Points
43
- Color: 559 Red
- Horsepower: 307
- Drivetrain: AWD
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
EDIT
See More
Vehicle Overview
It started life as a 1.8 automatic FWD car. It's basically a Lego set of mostly OE parts ranging from 1992-2021 to make a better version of my old swapped RS that was scrapped due to excessive rot.
It is swapped with a JDM EJ205 engine and running a merged main bulkhead wiring harness with the OE 2002 WRX ECU flashed with the Carberry ROM running dual maps via the blower motor switch. Street tune makes 307hp at the hubs, roughly 345 at the crank and has launch control engaged.
Dyno run Video here: https://youtube.com/shorts/D8sXNAzdQpg?si=OQVS5YbRUiW1Llp4
Map switching & Launch control Video: https://youtube.com/shorts/c7FkB1DPMgE?si=3YmP40uzC2qwExFl
-EJ207 intake manifold
-TGV and BOV/BPV blockoff deletes
-Transmission and rear end are a 4.44 5 speed set from a 2005 Outback XT
-Driveshaft from a 1998 Impreza outback
-Turbo is a VF48 from a 2021 STi
-565cc dark blue injectors from 2007 Legacy GT (flow tested and cleaned)
-Walbro 255 fuel pump
-2004 WRX fuel tank and straps
-MAC 3 port boost control solenoid
-Catless up pipe & catless Tsudo bellmouth down pipe
-Handmade catback exhaust with thrush glasspack
-02/03 WRX steering rack and front and rear cross members
-02-07 WRX sedan (+20mm) aluminum control arms and rear trailing/lateral arms
-06/07 WRX CV shafts
-06/07 WRX 4/2 piston calipers and rotors
-1994 Legacy 4 wheel disc non ABS brake proportioning valve
-2002 WRX airbox with Perrin silicone hoses
-Lightweight crank pulley
-TMIC from 2014 STi
-Custom TMIC sprayer with water/alcohol mix running off SVX OE winter wiper mode switch
-2004 STi gauge cluster fitted with the 1995 front plastics and VSS pro speed controller off RF ABS sensor (non ABS car)
-Innovate wideband o2 with DynoTune readout display mounted inside cluster
-Prosport Boost gauge
-Custom intercooler sprayer
-2004 WRX high back black seats
-99-01 RS coupe black rear seats
-2002 LL Bean Outback wood grain wheel with 04/05 WRX MOMO airbag cover
-Aluminum & brass shift knob I made in 2011
-Roof panel, sunroof and headliner from 2000 RS sedan
-1992 SVX spring loaded hinged gas cap
-06/07 WRX OE Enkei wheels painted BBS gold
-V1-V4 WRX/STi front bumper
-Custom painted JDM 'i' emblem
-Hood from 2001 Impreza Outback hatch
-Paint matched mirrors and door handles
-Headlights from 2001 Impreza Outback hatch
-Poly transmission mount
-Kartboy short shifter and poly rear shift bushing
-2002 WRX aluminum pedal set
-JDM tail lights
-Lots of Cerakoted brackets and pieces
Completed Modifications
Engine Management (ECU) (2) Forced Induction/Nitrous (1) Suspension/Steering/Chassis (2)
Future Plans
Just enjoy it and maybe get the AC hooked up someday.
It weighs about 2700lbs, has almost 350hp through a 5 speed and gets over 30mpg, good enough for a fun driver and weekend toy.
Comments
No one has left a comment yet.