- Color: Nasty Yellow/Green
- Horsepower: 210
- Drivetrain: 4x4
I'm Just a 8th grader trying to save up the money to do a couple of mods for the old thing. (Lift Kit, 2 Barrel Carb, New Gas Tank, Ect.)
Wish List: Scout 2
3-3/8" GPS Speedometer (w/ Odometer), 0-160 MPH, Black Face
3-3/8" CAN Tachometer 0-8K RPM Range, Black Face
coolant temperature - Standard 2-1/16" size - 120°-260° - Black Face - Black Bezel
LS Engine Drive includes SD7 A/C Compressor, Alternator, P/S Pump, Tensioner, SFI certified damper w/hard anodized billet crank pulley, Belt, & Pulleys
The improved efficiency of these Blaster Coils will give your LS the ignition boost you're looking for.
This custom fit extreme heat ceramic boot ferro-spiral core spark plug wire set fits GM gen 4 LS3/LS4/LS7 engines.
Fits Most 1997-'06 GM LS Engines - be sure to check the thread size on your block - it must be 13/16"-16.
Standard 2-1/16" size - Programmable - Black Face - Black Bezel
Oil Pressure Gauge - Standard 2-1/16" size - CAN - 0-100 PSI - Black Face - Black Bezel
Standard 2-1/16" Size - 0-18 volts - CAN - Black Face - Black Bezel
Jerry Can - Green - 5.3 Gallon (20 Liter) - Steel w/ Safety Cap & Spout - C.A.R.B. EO #G-14-079
Jerry Can Mounting System - Fits 5.3 Gallon (20 Liter) Metal Jerry Cans
GM LS Swap Oil Pan - 1955-1987 GM/Muscle Car/Classic Car/Trucks
Street/Strip Carb or EFI Applications
Supports up to 2150 EFI or 2400 Carb HP
Compatible with Pump Gas, Race Gas, Methanol and E85*
GM LS 58x Crank, 4x Cam - 4.8/5.3/6.0 Truck Engines and LS2/LS3 - 4L60E/4L80E Transmission Control, No Laptop Required, 3.5" Touchscreen Included
LS Turbo Headers (Up and forward) 1-7/8" 304SS GM 4.8/5.3/6.0L V8 Polished Finish
102MM Throttle Body LS Engine, Silver with GM IAC provision
Sniper EFI "Dual Plenum" Intake Manifold 102mm throttle body bore for GM LS3/L92 engines (Includes installation kit, and fuel rail kit) Silver Finish
Fabricated "Dual Plenum" Intake Manifold Throttle linkage kit 102mm Throttle Body opening for GM LS engines - Silver Finish
3.00 OFFSET INLET / 3.00 OFFSET OUTLET - AGGRESSIVE SOUND
Flowmaster Exhaust Tip - 3 in. Dual Out Angle Cut - Fits 3 in. Tubing - Weld On
16 pc. Universal Dual Exhaust Tubing Kit - 3.00-inch Mandrel-bent 409 Stainless Steel Tubing.