- Color: Blue/patina
- Horsepower: 300
- Drivetrain: RWD
Vehicle Overview
My 76 c10 that started out as a stock work truck. Had a 250 inline 6 that flooded out on me. So I swapped it for a small block 350. I've had this truck since I was 17 and I can't wait to see where it progresses as I get older
Completed Modifications
Brakes (1)
Drivetrain/Transmission/Differential (1)
Engine Parts (1)
Fuel System (1)
- 650 CFM Aluminum Street HP Mechanical Secondary-4150
Suspension/Steering/Chassis (1)
Future Plans
Add a turbo, build my bottom end, and make some power on old school foundation
Wish List: Stuff for the truck
- This is our most popular performance distributor! Must be used with an MSD 6, 7 or 8-series ignition.
- Small Block Chevy Turbo Header (Up and Forward) 304SS 1-7/8"- Natural Finish
- 340 LPH Drop-In Retrofit Carbureted Fuel System-E85 Compatible Supports up to 900 Carb HP (HP Rating @ 6 PSI at 13.5 Volts / 10.4 AMP Draw)
- Intake Manifold 1957-1986 262ci-400ci, 1987-later with Aluminum Heads
- One of MSD's solutions to the GM HEI's common problem of power loss and lack of response above 4,500 rpm.
Comments
No one has left a comment yet.