Skip to main content
10% Off Carbs - Save Big On Holley, Brawler, and More!
Motor Life Events Community Support
2103HKR - Hooker Super Competition Long Tube Headers - Painted Image
Hooker

Hooker Super Competition Long Tube Headers - Painted

Part # 2103HKR Be the first to write a review

1958-1964 Chevy Full Size Passenger/Wagons: 265-400 Tube 1.75" O.D. x 26", Collector Size 3" O.D., Collector Length Port Shape: Same As Port

Read More

Hooker Super Competition Long Tube Headers - Painted

Free Shipping - Lower 48 US States

In Stock

Advertised Price $949.95
$474.95
Save $475.00

Also Bought

With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10% better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotive drag racing history. Our "Alignment Weld Sleeve" allows the fabricator to align, hold and weld two pieces of mild steel tube without help. Because no rod is needed, the welder has a free hand. The "Alignment Sleeve" assures a perfectly aligned joint with no weld slag inside to reduce the tube diameter and restrict air flow. Perfect alignment and just the right amount of welding material results in a very professional looking weld. Weld Sleeves are packaged 20 sleeves per bag.

Features:

  • All necessary hardware included for a complete installation
  • Designed for optimal performance
  • Industry’s best welds for durability
  • 5/16” machined flanges for a perfect seal
  • Long transition collector for decreased back pressure
  • Light weight & sturdy 18 gauge tubing
  • Mandrel-bent tubing for smooth exhaust flow
  • Tuned-length primary tubes for maximum exhaust scavenging and velocity

About Hooker

Shop Hooker performance headers, exhaust manifolds, complete exhaust systems, mufflers, engine swap components, and accessories for classic and modern vehicles at Holley.

Air Injection TubesNo
Bolt Size3/8-16 x 3/4 IN
Bolts IncludedYes
Brand Hooker
California Proposition 65Yes
California Proposition 65 Chemical ListChromium
Nickel
CARB (California) CompliantFor Pre-1975 Vehicles only
CategoryExhaust
Collector Attachment3-Bolt Flange
Collector Diameter3.00 IN
Collector Reducer IncludedNo
Collector Reducer Outlet DiameterN/A IN
ColorBlack
DesignLong Tube
Drive2WD
EGT PortNo
Emission Code3
EngineChevrolet Small Block Gen I
FinishPainted
Flange Thickness5/16 IN
Gasket Or Seal IncludedYes
Grade TypePerformance
Header SeriesSuper Competition
Super Competition "Full Length Car Headers"
Header StyleLong Tube
MaterialMild Steel
Mounting Hardware IncludedYes
Oxygen Sensor PortNo
Part TypeExhaust Header
Port ShapeRectangle
Primary Tubing Diameter1 3/4 IN
1.75 IN
Product TypeHeaders
QuantitySold as a Pair
Sub CategoryExhaust Manifolds
Tube Wall Thickness16 GU
UPC700414006437
Part Number2103HKR
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Instructions - 2103hkrrev2.pdf
Long-tube headers do not include reducers. Do not use header wraps; they can cause header tube cracking from excessive heat or rust from moisture build-up and void the warranty. Breaking in an engine with ceramic-coated headers can damage the coating and void the warranty. Use cast-iron exhaust manifolds or old headers during engine break-in to prevent coating damage. Ceramic-coated headers require several heat cycles to fully cure before withstanding extreme heat. For additional information about ceramic-coated exhaust products, call Hooker Technical Service at 270-781-9741.

We Suggest

Recently Viewed Items
Hooker
Super Competition Long Tube Headers - Painted
1958-1964 Chevy Full Size Passenger/Wagons: 265-400 Tube 1.75" O.D. x 26", Collector Size 3" O.D., Collector Length Port Shape: Same As Port
Part# 2103HKR
Advertised Price $0.00
$474.95
Save $475.00
Hooker
Super Competition Long Tube Headers - Ceramic Coated
1967-1969 Camaro/Firebird: LS1 Tube Size 1.75", Collector Size 3", Port Shape: Same as Port
Part# 2288-1HKR
Advertised Price $0.00
$649.95
Save $650.00
Hooker
Super Competition Long Tube Headers - Ceramic Coated
Fits 1968-1974 Chevy/GMC 1/2, 3/4 & 1-Ton Truck, 1968-1974 Blazer/Yukon/Jimmy/Suburban/1-Ton Crew Cab: 396-502 Tube Size 2" x 35", Collector Size 3.5", Collector Length 10", Port Shape: Same As Port
Part# 2841-1HKR
$1,373.95
Hooker
Super Competition Long Tube Headers - Painted
1965-1974 Corvette: 396-502 Tube Size 2.125" x 45", Collector Size 4", Collector Length 10", Port Shape: Round, Sidemount
Part# 2222HKR
$1,299.95
Hooker
Super Competition Long Tube Headers - Painted
1965-1967 Chevelle/El Camino: 396-502 Tube 2.125" O.D. x 34", Collector Size 3.5" O.D., Collector Length 10", Port Shape: Round, Black High Temp Paint
Part# 2220HKR
Advertised Price $0.00
$684.95
Save $565.00
Flowtech Exhaust
Flowtech Long Tube Header - Black Paint
1966-1974 Chevy/GMC 1/2 & 3/4 & 1-Ton 2WD & 4WD, 1967-1974 Blazer/Jimmy 2WD, 1966-1972 Blazer/Jimmy K5/Suburban 4WD, 1973-1974 Blazer/Jimmy K5/Suburban 2WD & 4WD: 283-400, Tube Size 1.5", Collector Size 3"
Part# 11500FLT
Advertised Price $0.00
$223.95
Save $26.00
Flowtech Exhaust
Flowtech Long Tube Header - Black Paint
1963-1974 Chevy/GMC pick-up, 1/2, 3/4, 1-Ton pick-up, 4WD: 292, 230-250 6 Cyl., Tube Size 1.5", Collector Size 2.5"
Part# 11510FLT
Advertised Price $0.00
$268.95
Save $31.00
Mr. Gasket
Timing Cover Gasket - Quick Change Cam Cover
Replacement Gasket for Mr. Gasket Quick Change Cam Cover
Part# 92
 
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.

    Hooker Super Competition Long Tube Headers - Painted
    Hooker Super Competition Long Tube Headers - Painted
    Advertised Price $949.95
    $474.95
    Save $475.00