ASK OUR EXPERTS
1-866-464-6553

iNTECH Cold Air Intake

Fits 2011-2023 Dodge Challenger/Charger and 2012-2014 Chrysler 300 with 6.4L V8

Part # 223-12
1 Review
In Stock
Free Shipping - Lower 48 US States
Your Price
$406.95
Suggested Retail
$453.00
Add to Wish List
Create a new list
Starting at $36 a month with Learn More
7

Emissions

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020.

See Emissions Details
Holley's iNTECH cold air intake brand represents the highest degree of technology, performance and style for late model cars, trucks and SUV's. This system is designed for the popular 2011-2023 Dodge Challenger and Charger, as well as the 2012-2014 Chrysler 300, with the 6.4L HEMI V8. This intake made an additional 16 hp and 27 lbs.ft. torque on the dyno with a very broad power curve. All iNTECH sealed intakes feature a unique patented Slip-Seal housing-filter-tube interface that eliminates the use of hose clamps and adapters at the filter housing for a seamless installation. The large, high flow, washable and reusable 4-layer dry air filter eliminates the use of filter oils that may damage MAF sensors and set off check engine lights due to over oiling. The use of factory mounting locations makes for a simple installation and the housing design is styled to match the engine compartment of your vehicle for a stealthy appearance.

Features:

  • Produced +16 horsepower and +17 lbs.ft. of torque with excellent performance across all RPM levels
  • Unique patented Slip-Seal housing-filter-tube interface eliminates the use of hose clamps and adapters at the filter housing for a seamless installation
  • One-Piece fully sealed intake housing design guarantees a true fresh air intake charge
  • Utilizes factory mounting locations for a simple and secure installation
  • High-flow, washable and reusable 4-layer dry performance air filter for maximum air flow and filtration
  • Air filter media is constructed with an inner and outer aluminum mesh preventing filter deformation and rust
  • One-piece intake tube designed for maximum air flow and efficiency
  • Stainless steel hose clamps for maximum clamping force and durability

About Holley iNTECH

iNTECH intakes represent the highest degree of technology, performance, and style for late-model vehicles. Features like the Slip-Seal housing filter tube interface, 4-layer dry filters, and utilization of factory mounting points separate iNTECH intakes from the pack.

Air Box IncludedYes
Brand Holley iNTECH
CARB (California) CompliantNo
Emission Code7
Fuel TypeGas
Product TypeCold Air Intake
UPC090127057322
California Proposition 65 Chemical NameBrass
Polyethylene
California Proposition 65 RequiredYes
Part Number223-12
7

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.
Will not fit Challenger/Charger models equipped with factory Shaker Hood or Chrysler 300 models with factory HID lights
Reviews
1

5 out of 5 stars

  • 5 star

    100%

  • 4 star

    0%

  • 3 star

    0%

  • 2 star

    0%

  • 1 star

    0%

Your Review

Items 1 - 1 of 1
  per page
Page:
  1. 1
Items 1 - 1 of 1
  per page
Page:
  1. 1

*Free Shipping & Handling only offered to the contiguous US on orders over $100, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.