Skip to main content
ASK OUR EXPERTS
1-866-464-6553

Holley Gen III Hemi Hi-Ram EFI Manifold

Gen III Hemi EFI for use with 95 mm LS Style Throttle Body - Black Finish - Fits 2009-up 5.7L, 2005-2010 6.1L, and 2011-up 6.4L

Part # 300-650BK

Holley Gen III Hemi Hi-Ram EFI Manifold

In Stock
Free Shipping - Lower 48 US States
$1,117.95
Add to Wishlist
Starting at $99 a month with Learn More
3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details
Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.

Features:

  • Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
  • Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
  • Cast Aluminum Construction w/ Natural Satin or Black Finish
  • Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
  • Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
  • Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
  • O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
  • Billet Oil Fill Cap – Attractive Low Profile Design
  • Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
  • Overall Height: 11.59”
  • Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
  • Cast-In Pads for Adding Nitrous Nozzles
  • Manifold Base – Available Separately for Custom Induction Systems

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Brand Holley EFI
ColorBlack
ConstructionCast
Emission Code3
EngineGEN 3 HEMI
FinishBlack
Flange StyleEFI
Front Height11.59 inch
Fuel System TypeEFI
Injector Style ProvisionEV-1
Gen III Hemi
Inlet Size95mm
Manifold TypeHi-Ram
MaterialAluminum
Port Size1.70" x 1.88"
Product TypeIntake Manifold
Rear Height10.35 inch
RPM Power Band1500-7000
Runner Length6.65 inch
Sale CategoryAir and Fuel Delivery
StyleEFI
Throttle Bore95mm
Type of ComponentIntake Manifold
Vacuum Ports(2) 3/8" NPT & (1) 1/4" NPT
WarrantyLimited 90 Day
UPC090127105054
Part Number300-650BK
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Early 2003-2008 5.7L Engines Can Use 300-652 adapters to Match the Smaller Intake Ports on these Engines. The lid on this intake manifold is machined to fit an LS style throttle body since this allows the use a cable operated throttle body (at a reasonable cost). The 80mm Gen III Hemi Throttle Body (drive by wire) Can Be Used on This Intake - Use w/ 300-660 Adapter Plate. The 92mm Hellcat Gen III Hemi Throttle Body (drive by wire) Can Be Used on This Intake - Use w/ 300-661 Adapter Plate.
Limited 90 Day: See Details

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.