Skip to main content

Hooker Blackheart Long Tube Header - Stainless LS Swap Header

Part # BH14365 Be the first to write a review

1955-1957 Chevy - LS Engine Swap Headers - Works with 605, Borgeson, and Factory Steering - Fit CPP Mounts

Hooker Blackheart Long Tube Header - Stainless LS Swap Header

In Stock
Free Shipping - Lower 48 US States
$1,075.95
Add to Wishlist

8

Emissions

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle.

See Emissions Details
These swap headers allow enthusiasts to drop an LS engine into the ever popular 1955-1957 Chevy. These new headers were designed to fit only with a 605 box or stock steering setup. They are a true 1-7/8-inch long tube design to sufficiently maximize the torque and horsepower of the free breathing LS engines and constructed of 304 stainless steel.

Features:

  • True long-tube design to maximize performance potential of the LS engine
  • Thick plate steel flanges provide leak-proof seal at cylinder heads
  • Designed to work with 605 Borgeson power steering box and factory
  • Fits with CPP mounts
  • Hardware included
  • Designed to clear OEM A/C, manual steering gear boxes, power steering boxes, and power brake boosters
  • Compatible with GM TH350, TH400, 700R4, 2004R, 4L60-4L70, 4L80E/4L85E, 8L90, 10L80/90, and 6L80/90 automatic transmissions and the OE LS 4th-gen F-body/GTO Tremec T56, TKX, and aftermarket T56 Magnum manual transmissions.

About Hooker

Hooker Headers & exhaust systems are engineered to increase horsepower and torque while improving throttle response. Shop the official site of Hooker at Holley.com.

Air Injection TubesNo
Bolts IncludedYes
Brand Hooker
California Proposition 65Yes
California Proposition 65 Chemical ListChromium
Nickel
CARB (California) CompliantFor Pre-1975 Vehicles only
CategoryExhaust
Collector AttachmentSlip-Fit
Collector Diameter3.00 IN
Collector Reducer IncludedNo
Collector Reducer Outlet DiameterN/A IN
ColorSilver
DesignLong Tube
Drive2WD
EGT PortNo
Emission Code8
EngineGM Gen III/IV (LS)
FinishNatural
Flange Thickness3/8 IN
Gasket Or Seal IncludedNo
Grade TypePerformance
Header SeriesLS Swap
Header StyleLong Tube
Material304 Stainless Steel
Mounting Hardware IncludedYes
Oxygen Sensor PortYes
Part TypeExhaust Header
Port ShapeRound
Primary Tubing Diameter1 7/8 IN
1.875 IN
Product TypeHeaders
QuantitySold as a Pair
Sub CategoryExhaust Manifolds
Tube Wall Thickness18 GU
UPC090127842621
Part NumberBH14365
8

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

  • If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
  • The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
  • The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
  • An EO legal engine swap kit is utilized (such as a GM EROD)
  • The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.

Holley is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.

EPA Website
https://www.epa.gov/enforcement/epa-tampering-policy-epa-enforcement-policy-vehicle-and-engine-tampering-and-aftermarket

CARB Website
https://ww3.arb.ca.gov/msprog/aftermkt/aftermkt.htm

NOTE: Will not work with factory column shift linkage or Z bar. Aftermarket column linkage or cable kits such as those offered by Lokar™ and others will have to be used if you wish to maintain column shift capability of your vehicle. NOTE: Installation of the HOOKER Tri-5 headers will require the removal of the factory bell housing style rear engine mounts from the factory frame rails. NOTE: These headers are designed to clear OEM A/C, manual steering gear boxes, power steering boxes, and power brake boosters.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.

    Hooker Blackheart Long Tube Header - Stainless LS Swap Header
    Hooker Blackheart Long Tube Header - Stainless LS Swap Header
    $1,075.95