Hans Devices technical support

TORQUE SPECIFICATIONS FOR HANS DEVICE FASTENERS

HELMET ANCHORS

POST ANCHOR AND POST COLLAR

Torque specs for the indexing post or screw are: 30 Inch Pounds (in-lbs) OR 3.4 Newton Meters (N-m) which is similar to: Finger tight plus one quarter turn additional.

QUICK CLICK ANCHOR

Torque specs for the QC screw are: 30 Inch Pounds (in-lbs) OR 3.4 Newton Meters (N-m) which is similar to: Finger tight plus one quarter turn additional.

TETHER CLAMPS

FIXED TETHER CARRIERS

Torque specs for the screws holding the metal fixed tether clamps are:

20 Inch Pounds (in-lbs) OR 2.25 Newton Meters (N-m)which is similar to: Very tight.

SLIDING TETHER CARRIERS

Torque specs for the screws holding the orange sliding tether carriers are:

8.0 Inch Pounds (in-lbs) OR 0.9 Newton Meters (Nm) which is similar to: Finger tight.