Holley Releases New Single Plane Split Intake Manifolds for GM LS3/L92!| 11/11/2019
Holley has expanded their line-up of race oriented split-design intake manifolds by releasing two new LS3/L92 versions! A 4150 carbureted version gives consumers the ability to go old school and provide an option for a high-winding performance intake that doesn't break the bank! Meanwhile the EFI version also includes the 4150 bolt flange allowing racers to use a variety of throttle body and intake elbow combinations. Click here to learn more!
Sniper EFI Releases Fabricated Hemi Intakes & Race Series Hemi Intakes| 09/11/2019
Both are available in your choice of a stealth black or shiny finish.
Gregg Hamilton Has Built Not One But Two of the Coolest Firebirds You'll Ever See| 07/16/2019
They're couldn't be less alike – one's a '71 Firebird that would have been right at home in the movie "Mad Max" and the other is a '79 Trans Am cooler than the one from "Smokey & the Bandit."
MSD Releases Atomic Billet Fuel Rails and LS/LT Atomic AirForce Intake Manifolds in Black & Gray| 07/03/2019
They're available in two versions – just the fuel rails themselves or in complete kits with all the hardware to plumb the system.
New Performance Products from Holley, iNTECH, NOS, Sniper, and Brawler| 05/30/2019
Choose from high and low accessory-mount kits, two types of 2-piece LS valve covers, cold-air intakes, dry-nitrous systems lower manifolds, retro-fit carbureted fuel modules, carb hats, and street/race carburetors.
Holley Releases Single-Plane Split-Design Race Intake Manifold| 03/27/2019
They're lighter than ordinary split race intakes and cost one-third to one-half as much.
NOS Releases Dry Nitrous Plates For Sniper EFI Fabricated LS Intakes| 02/28/2019
They "sandwich" between the top plate and bottom base plate and spray through eight .040-inch openings into the center of each intake runner for optimum distribution and max power.
NOS Releases Dry Nitrous Plates For Holley Hi-Ram LS Intake Manifolds| 02/27/2019
They bolt up between the top plate and bottom base plate on two-piece Holley Hi-Ram LS manifolds and can easily handle up to 1000 horsepower.
Miller Finishes 2nd at King of the Hammers in First Start With MSD AirForce intake| 02/15/2019
10-year veteran earned his third podium finish in the past four years.
Holley EFI Releases Black 351W Hi-Ram Manifolds| 11/15/2018
Two versions are available – one for 95mm throttle bodies and one for 105mm throttle bodies.