2002 Chevrolet S10

Vehicle Overview

Custom Dark Blue paint, Wheels 15x8 on the front and 15x10 on the rear American Racing AR61 Outlaw I. Tires: Hankook Ventus 265/50/15 on front. 295/50/15 on rear. Lowered Springs, 2" front, Blocks, 3" rear. Pioneer AVH-X2700BS stereo with CD and Back Up Camera. Custom Front Grill, Fiberglass Bed Cover, 2" Tapered Cowl hood, All new LED lights. 4.3 V6, Summit High Performance Distributor, Hypertech Coil, Straight exhaust cut off after the converter. Steel Rear Roll Pan with Hidden Hitch and Folding License plate, LED Lighted License Plate. Window Vent Shades. SMM Tublar Upper Control Arms, SSM Solid Front Upper Control Arm Bushings, SSM Tall Performance Upper Ball Joints, SSM Tall Performance Lower Ball Joints, SMM Ball Joint Dust Boot Kit Upper & Lower, Mevotech Blue Polyurethane Stabilizer Bar Link Kit, Mevotech Blue Polyurethane 33mm Stabilizer Bar Bushing, Mevotech Steering Center Link, Mevotech Steering Idler Arm w/Blue Boot, Mevotech Tie Rod End Adjusting Sleeves, Mevotech Inner Tie Rod Ends w/Blue Boots, Mevotech Outer Tie Rod Ends w/Blue Boots, Energy Suspension Polyurethane Front Lower Control Arm Bushings. I have cut off the factory exhaust and have it running through just a single FLOWMONSTER 2-CHAMBER MUFFLER AGGRESSIVE SOUND Part # 42441-FM. It sounds good, but almost too quiet for me.

Vehicle Story

Future Plans

Dual Exhaust right off the factory manifolds with a pair of FLOWMONSTER 1-CHAMBER MUFFLERS AGGRESSIVE SOUND Part # 42510-FM then run both pipes out in front of the right rear tire. Change standard S10 fuel tank to rear mounted S10 Blazer tank or Fuel Cell. Move battery to passenger rear of bed. Both of these are for better 50/50 weight distribution. I have already removed the spare tire and mount as well as jack and tire iron. Add throttle body spacer, stage 3 computer chip & high performance spark plugs. Upgrade the wheels & tires, change rear tires to Mickey ThompsonET Street® S/S P295/55R15, install 7.5 Locker 3:73 rear end I have already got. Add blue under body & interior lighting. Add rear window vent shades, Add matching floor mats. Add speaker boxes and amp behind the seats (it is already wired for it). I already have a matching bed for a trailer and it will have matching ground effects and fiberglass cover, just need to cut the frame I have for it now. I may be changing from the American Racing AR61 Outlaw I wheels to similar Centerline wheels to get a better back spacing on the rear.