Skip to main content

QuickTime Transmission Spacer - T-56 and Magnum - 1/4" Aluminum

Part # RM-199 Be the first to write a review

Fits Between Bellhousing and Transmission to Adjust for Input Shaft Length or Other Variables

QuickTime Transmission Spacer - T-56 and Magnum - 1/4" Aluminum

Estimated Ship Date: 08/18/2025
Find Similar In-Stock Items
Free Shipping - Lower 48 US States
$133.95
Add to Wishlist
Notify Me When Available
5

Emissions

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.

See Emissions Details
This Quicktime spacer enables custom setups where the T-56 input shaft protrudes too much from the bellhousing for proper crank fitment. Measure carefully and avoid forcing any components to prevent severe damage. For T-56 to L83-L84 Gen V GM Engine installations, use Lakewood Transmission Installation Kit #50375, which includes the correct plate and hardware, though longer transmission dowel pins are needed (not included). The spacer is made from 6061-T6 Aluminum.For LS swaps, choose the proper pilot bearing based on the shaft protrusion: Small (1.094 inches) for GM LS1 vehicles (1998-2002), Medium (1.652 inches) for LS3, LSA, LSX, and LS9 vehicles (2003-2012), or Oversize (1.705 inches) for some aftermarket crankshafts and GM crate engines. Measure the protrusion with a straight edge: if between 3/4 and 1 inch (19mm-25.4mm), use the small bearing; if between 1/4 and 3/8 inch (6.3mm-9.5mm), test fit the medium bearing. If itโ€™s a loose fit, use the large bearing.To install, remove the old pilot bearing with a mechanical puller (avoid hydraulic methods), clean the crankshaft bore, and press the new bearing into place by driving or pressing on its outer edge only. Ensure it is straight and fully seated. Once installed, spin the bearingโ€™s inner portion to verify smooth rotation.Important: Do not disturb the press-in oil plug inside the crankshaft flange. Avoid hydraulic methods for bearing removal and installation. Ensure proper fit and alignment of the new bearing without forcing it.

About Quick Time

Looking for lightweight steel bellhousings and drivetrain products? Shop Holley.com for the ultimate bellhousing that's half the industry-standard weight.

Brand Quick Time
CategoryEngine
Emission Code5
MaterialAluminum
Part TypeEngine To Transmission Spacer Plate
Product TypeTransmission Spacer
Sub CategoryCylinder Block Components
Thickness (in).250
Weight2
UPC084041027387
Part NumberRM-199
5

This part is legal for sale or use on Emissions Controlled Vehicles, Uncontrolled (Non-Emissions Controlled) Vehicles, and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.