Skip to main content

Hooker Super Competition Long Tube Headers - Painted

Part # 2292HKR Be the first to write a review

1955-1957 Chevys; LS (all exc. LS7) Engine Swap Headers with stock or Saginaw 605 gear boxes

Hooker Super Competition Long Tube Headers - Painted

In Stock
Free Shipping - Lower 48 US States
$899.95
Add to Wishlist

4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
These swap headers allow enthusiasts to drop an LS (all exc. LS7) engine into the ever popular 1955-1957 Chevy. These new headers were designed to fit with a stock gear box or Saginaw 605 gear box only. If using a unisteer rack system, see part # 2293HKR. They are a true 1-3/4" long tube design to sufficiently maximize the torque and horsepower of the free breathing LS engines. They are available in high temp black paint, silver ceramic or Hooker's brand new "Darkside" black ceramic.

Features:

  • True long-tube design to maximize performance potential of engine
  • Thick plate steel flanges provide leak-proof seal at cylinder heads
  • Designed to fit with stock or Saginaw 605 steering boxes
  • Designed to be compatible with other popular aftermarket components for this application
  • Available in three different finishes for more variations in vehicle personalization.

About Hooker

Hooker Headers & exhaust systems are engineered to increase horsepower and torque while improving throttle response. Shop the official site of Hooker at Holley.com.

Air Injection TubesNo
Bolt SizeM8 x 1.25 x 25mm MM
Bolts IncludedYes
Brand Hooker
California Proposition 65Yes
California Proposition 65 Chemical ListChromium
Nickel
CARB (California) CompliantFor Pre-1975 Vehicles only
CategoryExhaust
Collector AttachmentWeld-On
Collector Diameter3.00 IN
Collector Reducer IncludedNo
Collector Reducer Outlet DiameterN/A IN
ColorBlack
DesignLong Tube
Drive2WD
EGT PortNo
Emission Code4
EngineGM Gen III/IV (LS)
FinishPainted
Flange Thickness3/8 IN
Gasket Or Seal IncludedYes
Grade TypePerformance
Header SeriesSuper Competition Engine Swap Headers
Header StyleLong Tube
MaterialMild Steel
Mounting Hardware IncludedYes
Oxygen Sensor PortYes
Part TypeExhaust Header
Port ShapeRound
Primary Tubing Diameter1 3/4 IN
1.75 IN
Product TypeHeaders
QuantitySold as a Pair
Sub CategoryExhaust Manifolds
Tube Wall Thickness16 GU
UPC090127663257
Part Number2292HKR
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Hooker recommends using cast iron exhaust manifolds or old headers during your engine break-in period to avoid damaging your coated damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty. Hooker long tube headers do not come with header reducers.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.

    Hooker Super Competition Long Tube Headers - Painted
    Hooker Super Competition Long Tube Headers - Painted
    $899.95