Skip to main content
Overstock Sale - Savings up to 40% off!
Motor Life Events Community Support
8
Images
Videos
Holley

Holley Street HP Carburetor

750 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline

Part # 0-82751 Be the first to write a review

Holley Street HP Carburetor

In Stock
Free Shipping - Lower 48 US States
$714.95
Add to Wishlist

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details

Also Bought

The Street HP™ uses the best features from Holley's race Bred 4150 HP™ carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used on the 650 and 750 cfm models so there are plenty of vacuum ports for power brakes, PCV, etc. The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor. Limited to stock. replaced by 0-82751SA

Features:

  • Vibratory polished for good looks
  • Optimized street/strip calibration for outstanding throttle response and drivability
  • Contoured venturri inlet offers balanced airflow for increased horsepower
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Mechanical secondaries for awesome tire turning performance
  • Dual accelerator pumps for additional fuel under initial acceleration
  • Dual feed fuel inlets for constant high volume fuel delivery
  • Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required.
  • Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
  • 100% wet-flow tested by Holley technicians to assure it arrives ready to run!

About Holley

Holley Performance Brands is the undisputed leader in carburetors, fuel pumps, fuel injection, intake manifolds, fuel injection, and fuel systems.

Barrel Quantity4
Barrels4
Body ColorPolished
Body FinishPolished
BoosterDownleg
Booster DesignDownleg
Brand Holley
Carburetor MaterialAluminum
Carburetor UsePerformance and Race
CategoryAir and Fuel Delivery
CFM750
ChokeNone
ConditionNew
Cubic Feet Per Minute Rating750
Emission Code3
FinishShiny
Flange TypeSquare/4150
FuelGasoline
Fuel InletDual
Grade TypePerformance
High Speed Air Bleed36
Idle Air Bleed Size71
Linkage AttachedYes
Marine ApprovedNo
Marine UseNo
MaterialAluminum
Model4150
Mounting Hole Quantity4
Part TypeCarburetor
Primary Jet Diameter77
Primary Main Jet77
Primary Power Valve4.5
Primary Pump Nozzle Size28
Product TypeCarburetor
SecondariesMechanical
Secondary Main Jet84
Secondary Pump Nozzle Size31
Spacer IncludedNo
Sub CategoryCarburetion
Supercharged ApplicationNo
Throttle Bore1.688 inch
Venturii Size1.375 inch
WarrantyManufacturer's Limited 90 Day Warranty
UPC090127605844
Part Number0-82751
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Holley Carburetor Selector
Instructions - 199r10319-2rev2.pdf
Instructions - techlibrary_carb_numerical_listing.pdf
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.
Manufacturer's Limited 90 Day Warranty: See Details

We Suggest

Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.