Sniper EFI Fuel Tank System
1969-70 Ford Mustang, Coated Steel, EFI, Gas
PART# 19-117
Be the first to write a review
$629.95
Suggested Retail
$566.95 Your Price
$566.95 Your Price
Free Shipping
In Stock
Qty:
Add to Wish List
Starting at $50 a month with
Learn More
Overview
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling, a fuel level sender, and the filler neck. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project!
***Steel filler neck that extends to rear valance is not included. You must use your existing stock filler neck or purchase one through restoration suppliers.
***These tanks are perfect for your next classic truck EFI conversion project as well.
Supports up to 550 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw)
Size is: 32-5/8" x 24-1/2" x 9-3/4"
For a better seal use Permatex Indian
Head Gasket Shellac Compound or
Aviation Form-A-Gasket sealant on the
gasket and screws.
Features:
- Tanks are coated galvanized steel then powder coated silver for total corrosion protection
- 255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
- Sender has ¼” NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
- Fuel level sender included with the correct Ohm range for your factory gauges
- Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car
- EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation
- Fits and looks like an OE tank when installed
- Complete bolt in solution for your EFI conversion
Specs
| Application | 1969-1970 Ford Mustang |
|---|---|
| Brand | Sniper EFI |
| Color | Silver |
| Drain Plug | No |
| Emission Code | 3 |
| Finish | Powdercoated |
| Free Flow LPH | 255 |
| Fuel Sending Unit Ohms | 73-10 Ohms |
| Fuel System Type | Gasoline |
| Gallon Capacity | 22 |
| New Straps Included | No |
| Product Type | Fuel Tank |
| Part Number | 19-117 |
Service Parts
![Holley EFI Fuel System Kit]()
Fuel system consisting of; 40ft of 3/8” Vapor Guard™ Fuel Hose, Filter, necessary hardware for a return style system installation$229.95Qty:![340 LPH E85 In-Tank Electric Fuel Pump]()
Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...$99.95Qty:![255 LPH GPA Series Fuel Pump Assembly]()
Replacement 255 LPH FUEL PUMP AND HANGER ASSEMBLY$249.95Qty:![400 LPH Fuel Pump Assembly]()
![Fuel Pump Hanger Gasket and Screw Kit]()
Thicker Cork/Rubber Gasket and Screw Kit (6)$9.49Qty:![Fuel Gauge Sending Unit Gasket and Screw Kit]()
Cork/Rubber Gasket and Screw Kit for 5-hole sending unit$7.99Qty:![Fuel Pump Hanger Cork/Rubber Gasket and Screw Kit]()
Cork/Rubber Gasket and Screw Kit (6)$7.99Qty:![Fuel Gauge Sending Units]()
Emissions
This part is legal for use on Uncontrolled (Non-Emissions Controlled) Vehicles or Racing Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
Racing Vehicles are vehicles that are used exclusively for racing or other forms of competition that are not registered and that may never be used on the street.
*Free Shipping & Handling only offered to the contiguous US on orders over $100.
Some parts are not legal for use in California or other states with similar regulations.