Pro Mag Magneto Accessories

Items 1 - 51 of 51 Items

Sort By:

Featured
Most Popular
Best Deal
Price (low to high)
Price (high to low)
New Arrivals

MSD
MSD Super Conductor Bulk Wire, Black 300' Black Super Conductor Spark Plug wire in bulk, 300' length.

Part# 34053
In Stock

Free Shipping

$699.95

Compare
MSD
Dual Plug Hemi Wire Set, Red and Black Super Conductor 8.5mm For use on Dual Plug Hemi Engines, Red and Black Wire Set and Tubes.

Part# 31559
In Stock

Free Shipping

$726.95

Compare
MSD
MSD Spark Plug Wire - Super Conductor - 8.5mm - Red - Bulk 300 Foot Length Roll

Part# 34059
In Stock

Free Shipping

$699.95

Compare
MSD
MSD Tach Signal GMR Pickup Converts a low-voltage, high-current pulse to a clean 12-volt square wave with no wire splicing required.

Part# 8918
In Stock

Free Shipping

$118.95

Compare
MSD
MSD Spark Plug Terminals - 90° - Qty 100 Dual-Crimp Spark Plug Terminals

Part# 34615
In Stock

Free Shipping

$107.95

Compare
MSD
MSD Pro-Clamp Separators The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources.

Part# 8843
In Stock

Free Shipping

$41.62

Compare
MSD
Pro-Cap Cap-A-Dapt Kit, Fits Band Clamp Pro Mags Increasing the distance between the terminals lessens the chance of spark scatter as well as the build-up of ozone inside the cap. MSD offers a full line of Cap-A-Dapts for all Pro-Mags.

Part# 7455
In Stock

Free Shipping

$349.95

Compare
MSD
MSD Distributor Cap - Ford HEI - Black 1972-1997 Ford V8 - 255/302/351/400/460ci

Part# 84083
In Stock

Free Shipping

$71.09

Compare
MSD
MSD Dual Plug Wire Separators, Set of 16, for 8-8.5mm Wires Tidy up your engine bay with MSD Dual Plug Wire Separators! Securely mount and route those wires to your liking, while protecting wires from damaging heat sources or pinch zones. For use with 8-8.5mm wires

Part# 8841
In Stock

$35.08

Compare
MSD
Universal Tach Convertor for Magnetos Converts the Pro-Mag's coil signal into a 12 volt square wave signal.

Part# 8132MSD
Free Shipping

$183.95

Compare
MSD
MSD Noise Capacitor, 26 Kufd Filters away EMI that is caused by MSD power cables and prevents damage from voltage and current surges.

Part# 8830MSD
In Stock

Free Shipping

$76.49

Compare
MSD
MSD Shrink Sleeve, Numbered for Cylinders This Sleeving simply slides over the spark plug boot or other connection and will shrink tightly around it for a secure connection.

Part# 3415
In Stock

$25.95

Compare
MSD
Single Hemi Wire Set, Super Conductor 8.5mm Wire Set, Red Red single wire 8.5mm wire set, supplied with Red Hemi tubes, boots and terminals and mini-crimper. Pre-Crimped at the spark plug end.

Part# 31529
In Stock

Free Shipping

$399.95

Compare
MSD
MSD Super Conductor Spark Plug Wire Set Ford and Chrysler Hemi Pro Stock Head The new Ford and Chrysler Hemi style cylinder heads being used in Pro Stock racing features a long, skinny tunnel to access the spark plug. MSD's injection molded tubes are designed specifically for these hard to reach plugs.

Part# 31539
In Stock

Free Shipping

$399.95

Compare
MSD
MSD Hemi Tubes, Black Set of 8 Hemi Tubes, Elbows, End Caps and Screws, Black

Part# 34753
In Stock

$135.95

Compare
MSD
MSD Pro-Heat Guard, Hi-Temp Silicone Sleeve, 25' This tough sleeving is made up of a thick glass woven core that resists temperatures up to 1,000°F.

Part# 3411
In Stock

Free Shipping

$207.95

Compare
MSD
MSD Super Conductor 8.5mm Wire, 100' Bulk Red Super Conductor Spark Plug wire in bulk, 100' length.

Part# 34049
In Stock

Free Shipping

$362.95

Compare
MSD
MSD Ford HEI Distributor Cap The Ford-style cap has a provision for the coil wire to be routed in separately.

Part# 8408
In Stock

Free Shipping

$61.35

Compare
MSD
MSD Chevy Billet Distributor Hold Down Clamp The MSD Chevrolet Hold Down Clamp is CNC machined from steel for a precision fit with our Billet Distributor line.

Part# 8110
In Stock

Free Shipping

$63.69

Compare
MSD
MSD Hemi Tubes, Red Set of 8 Hemi Tubes, Elbows, End Caps and Screws, Red

Part# 34759
In Stock

$114.95

Compare
MSD
MSD Sprint Car Crank Trigger to Generator Cross-Over Switch This switch allows you to start the car and toggle between pickups, so the engine only needs to be started once to get the timing dialed in.

Part# 7990
In Stock

Free Shipping

$212.95

Compare
MSD
MSD Dual Plug Wire Separators, Set of 16, for Sleeved 8-8.5mm Wires Tidy up your engine bay with MSD Dual Plug Wire Separators! Securely mount and route wires to your liking, while protecting wires from damaging heat sources or pinch zones. Use with 8-8.5mm wires with sleeves. Size #6 mounting screw size.

Part# 8842
In Stock

$35.08

Compare
MSD
MSD Shrink Sleeve, Spark Plug Wires MSD Shrink Sleeving can be used to protect connections throughout the vehicle as well as spark plug wires.

Part# 3407
In Stock

Free Shipping

$61.65

Compare
MSD
Pro Cap, Fits 7445,7455,74553 Replacement Pro Cap Red, 5" terminal to terminal diameter

Part# 7408
In Stock

$118.95

Compare
MSD
MSD Vibration Mounts for 44 amp coil Four mounts and hardware are included in each kit.

Part# 8822
In Stock

Free Shipping

$63.19

Compare
MSD
Pro Cap, Fits 7445,7455, 74553 Replacement Pro Cap Black, 5" terminal to terminal diameter

Part# 74083
In Stock

$105.95

Compare
MSD
MSD Ford Distributor Hold Down Clamp This Ford Hold Down Clamp is CNC machined from steel.

Part# 8010MSD
In Stock

$92.75

Compare
MSD
MSD Pro Cap Rotor, fits 7455 Replacement Rotor for the Pro Cap.

Part# 7423
In Stock

Free Shipping

$77.25

Compare
MSD
MSD Wire Cylinder Markers - 8.5MM Universal - Ensure Your Plug Wires Are Always In The Right Place

Part# 3414
In Stock

$17.75

Compare
MSD
MSD Super Conductor Spark Plug Wire Set Chevy Pro Stock Head Special ZR1 Boot is incorporated. Designed for the Chevy Pro Stock head, these 8.5mm wires incorporate a special boot for the spark plug. 90 degree boots and terminals are supplied to be installed on the distributor side.

Part# 30839
In Stock

Free Shipping

Advertised Price $226.95

$179.95

Save $47.00

Compare
MSD
Single Hemi Wire Set, Super Conductor 8.5mm Wire Set, Black Black single wire 8.5mm wire set, supplied with Black Hemi tubes, boots and terminals and mini-crimper. Pre-Crimped at the spark plug end.

Part# 31523
In Stock

Free Shipping

$349.95

Compare
MSD
8.5mm Super Conductor Wire set for SBC Sprintcar, Close Fit, in Black Features a helically-wound copper alloy conductor which has only 40 - 50 ohms of resistance per foot.

Part# 31543
In Stock

Free Shipping

$207.95

Compare
MSD
Red Super Conductor Wire Set, Chevy Sprint Car Tight fit / 90 Degree at plug / 90 Degree at cap

Part# 31549
In Stock

Free Shipping

$226.95

Compare
MSD
MSD Super Conductor Bulk Wire, Black 100' Bulk Black Super Conductor Spark Plug wire in bulk, 100' length.

Part# 34043
In Stock

Free Shipping

$362.95

Compare
MSD
MSD Multi-Angle Spark Terminals, 100 each Dual-crimp spark plug terminals

Part# 34605
In Stock

Free Shipping

$90.49

Compare
MSD
Hemi Spark Plug Boot, Bulk 50, For Hemi Tubes MSD boots are designed with longevity in mind. They provide excellent heat resistance as well as maximum protection against spark loss.

Part# 3467
In Stock

Free Shipping

$449.95

Compare
MSD
Hemi Tubes, Set of 16, 8-Red and 8-Black These Hemi tubes meet NHRA's requirements.

Part# 3475
In Stock

Free Shipping

$271.95

Compare
MSD
Pro Stock HEMI Tubes The set of eight includes the tubes and components to assemble the wire.

Part# 3476
In Stock

Free Shipping

$163.95

Compare
MSD
MSD Wire Retainer - Pro-Cap Cap-A-Dapt - Black Use With PN 7445 Or 7455 - Made From DuPont Rynite

Part# 74093
Free Shipping

$49.95

Compare
MSD
Black Pro-Cap Cap-A-Dapt Kit, Fits Band Clamp Pro Mags Increasing the distance between the terminals lessens the chance of spark scatter as well as the build-up of ozone inside the cap. MSD offers a full line of Cap-A-Dapts for all Pro-Mags.

Part# 74553
In Stock

Free Shipping

$340.95

Compare
MSD
Replacement Base for Pro-Cap, Fits Pro Mag, Black Replacement Base for MSD PRO-MAG Pro-Cap, Black

Part# 74563

$84.29

Compare
MSD
MSD Steel Anti Rotation Clamp for PN 7908 The clamp features MSD's three-point clamp design plus its straight edges match to the slip collar, completely eliminating rotation.

Part# 7905
In Stock

$110.95

Compare
MSD
Replacement Cap and Rotor for Pro Mag, Red Replacement Pro Cap Red, 3" terminal to terminal diameter

Part# 7919
In Stock

Free Shipping

$155.95

Compare
MSD
Replacement Cap and Rotor for Pro Mag, Black Replacement Pro Cap Black, 3" terminal to terminal diameter

Part# 79193
In Stock

Free Shipping

$155.95

Compare
MSD
Pro Mag Blue Rotor fits PN's 8130, 8140 Replacement rotor molded from DuPont Rynite.

Part# 7920
In Stock

$41.62

Compare
MSD
Kill Switch for MSD 12 and 20 Amp Pro Mags This heavy-duty single-pole, single-throw kill switch will stand up to the abuse of racing.

Part# 8111
In Stock

$123.95

Compare
MSD
Pro Mag Cap and Rotor, fits PN 8130, 8140 Replacement Pro Mag cap and rotor.

Part# 8119
In Stock

$84.29

Compare
MSD
Pro Mag Replacement Cap Ring fits PN's 8130, 8140 Replacement black ring for band clamp Pro-Mags.

Part# 8120
In Stock

$118.95

Compare
MSD
MSD Pro Mag Timing Tape MSD Pro Mag timing tape. Designed for use with Pro Mag 44 magnetos, this timing tape is placed on the generator housing. Then, by fashioning a pointer, you get a better idea of when to change the ignition timing by moving the housing.

Part# 8126MSD
In Stock

$9.08

Compare
MSD
2" Extension Harness for Pro Mag 44 Amp Features matching connectors and wiring.

Part# 8143
In Stock

$142.95

Compare
MSD
Heavy Duty Band Clamp for Pro Mags The stainless steel clamp tightly locks and holds the generator to its drive housing.

Part# 8148
In Stock

Free Shipping

$188.95

Compare

Pro Mag Accessories

Pro Mag Accessories