Skip to main content

Coil-Near-Plug Smart Coil

Part # 556-112 Be the first to write a review

For Dominator, HP ECU's, and other EFI systems

Coil-Near-Plug Smart Coil

In Stock
Free Shipping on orders over $150*
$92.59
Add to Wishlist
4

Emissions

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

    See Emissions Details
This coil is designed for use with Holley HP and Dominator ECU's, as well other EFI systems that can drive "smart" ignition coils. Although it is designed for high powered race applications, it can be used on street driven vehicles as well.

Features:

  • Peak Voltage - 44,000V
  • Peak Output - 102 Mj
  • Maximum Battery Voltage - 17V
  • Mating Connector - Delphi P/N 12162825 “Pull to Seat”
  • Connector Pin - Delphi P/N 12124075 “Pull to Seat”
  • Includes mating connector and pins

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Brand Holley EFI
CategoryIgnition
Coil TypeHolley SmartCoil
Coil Wire IncludedNo
ColorBlack
Connector GenderFemale
Emission Code4
Grade TypePerformance
Height1.86"
Ignition Wire Terminal TypeHEI Style Tower
Mounting Bolt Pattern74mm
Mounting Bracket IncludedNo
Mounting Hardware IncludedNo
Mounting Hole Quantity2
Oil FilledNo
Overall Length4.3"
Part TypeDirect Ignition Coil
Product TypeDistrutorless Ignition - DIS - smart coil
Sub CategoryIgnition Coil
Terminal GenderMale
Width3.6"
UPC090127685150
Part Number556-112
4

This part is legal for sale or use on Racing Use Only Vehicles

The following vehicles are considered Racing Use Only Vehicles:

  • Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street.

WARNING: It is against the law to install this part on an Emissions Controlled Vehicle

Holley EFI Dealers
Do you need a custom kit built for your application? Do you need a system installed and tuned? Click here to find the Holley EFI dealer in your area!
The wire must be fed through the back of the housing, out the front, and then the pin crimped. Pull the wire back in to seat it. Always use proper crimping tools to ensure a proper connection.
Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.