Skip to main content
Iconic Heritage - 10% Off Thousands of products
Motor Life Events Community Support
Videos
Holley EFI

Holley Mid-Rise Intake - GM LS3/L92 w/ 95mm Top

Part # 300-135 Be the first to write a review

All GM LS Gen III or IV engines equipped with LS3/L92 style rectangular ports. Mid-Rise EFI Intake Manifold Kit. 1500-6500RPM Power Band.

Holley Mid-Rise Intake - GM LS3/L92 w/ 95mm Top

In Stock
Free Shipping - Lower 48 US States
Advertised Price $1,126.95
$1,013.95
Save $113.00
Add to Wishlist

3

Emissions

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.

See Emissions Details

Also Bought

The Modular Mid-Rise intake utilizes the popular Holley LS3/L92 rectangle port Mid-Rise intake manifold along with a purpose built plenum base adapter and a Holley 95MM EFI plenum top which converts it into a Mid-Rise EFI intake manifold. With a max overall height of only 10.44", the Mid-Rise manifold is an excellent choice for street and performance street/strip applications with a powerband from 1,500-6,500 RPM and limited hood clearance. It's perfect for turbocharged, or naturally aspirated applications. *** The front and rear height measurements listed in the Specs section are referencing the overall height with the top plate installed. Please see the diagrams in the product images for other dimensions. This manifold is modular, and the plenum adapter (PN 300-231) will accept all of the popular Holley LS Hi-Ram plenum tops as a foundation for custom induction systems.

Features:

  • Mid-Rise manifold for excellent street/strip performance
  • Fits GM LS3/L92 engines
  • 92MM EFI Plenum
  • Overall Height of 10.44 inches
  • 1500-6500RPM Power Band

About Holley EFI

Find standalone EFI for LS, Coyote, Hemi and more at Holley.com. From engine swapping to managing up to 4000 horsepower, we have a solution for every project!

Basic Operating RPM Range2500-7000 RPM
Brand Holley EFI
Carburetor FlangeN/A
Carburetor QuantityN/A
Carburetor Studs IncludedN/A
CategoryEngine
CNC PortedNo
ColorSilver
ConstructionCast
Cylinder Head Port ShapeRectangle
Deck Height9.24 IN
EGR PortNo
Emission Code3
EngineGM LS3/L92
Flange StyleEFI
Front Maximum Height10.44 IN
Fuel Injectors IncludedNo
Fuel Rail(s) IncludedYes
Fuel System TypeEFI
Gasket Or Seal IncludedYes
Grade TypePerformance
Intake Port Gasket(s) IncludedYes
Manifold TypeMid Rise
MaterialAluminum
Nitrous Bung(s) IncludedNo
Part TypeEngine Intake Manifold
Plenum FinishNatural
Product TypeIntake Manifold
Rear Maximum Height9.99 IN
Recommended UseForced Induction
Removable RunnersNo
Removable Top/LidYes
Single Or Dual Plane TypeSingle Plane
Sub CategoryCylinder Block Components
Throttle Body Bore Diameter95 MM
Throttle Body Gasket IncludedYes
Throttle Body IncludedNo
Vacuum PortsYes
WarrantyManufacturer's Limited 90 Day Warranty
UPC090127688687
Part Number300-135
3

This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles.


The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:

  • 1965 and older U.S. manufactured California Certified vehicles
  • 1967 and older U.S. manufactured Federally Certified vehicles
  • 1967 and older Foreign manufactured vehicle


WARNING: It is against the law to install this part on an Emissions Controlled Vehicle


The following vehicles are considered Emissions Controlled Vehicles:

  • 1966 and newer U.S. manufactured California Certified vehicles
  • 1968 and newer U.S. manufactured Federally Certified vehicles
  • 1968 and newer Foreign manufactured vehicle
Instructions - 199r11796.pdf
Instructions - 199r10692.pdf
Recalibration of the ECU may be required when using this intake manifold design with OE ECU. Holley EFI LS main harnesses have a map sensor connecter designed for use with an LS1/2 style map sensor. The 558-416 is an adapter harness that can be used to adapt any LS harness that uses a LS1/2 MAP sensor connection to a LS3 MAP, which is recommended for this manifold. NOTE: these manifolds & fuel rails are designed to accept Bosch Style EV-1 or Magneti Marelli Pico fuel injectors (OE LS fuel injectors may not fit properly in the intake manifold & fuel rail assembly). *** The front and rear height measurements listed in the Specs section are referencing the overall height with the top plate installed. Please see the diagrams in the product images for other dimensions.
Manufacturer's Limited 90 Day Warranty: See Details

We Suggest

Reviews

    Your Review

    *Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

    Some parts are not legal for use in California or other states with similar regulations.

    Holley Mid-Rise Intake - GM LS3/L92 w/ 95mm Top
    Holley Mid-Rise Intake - GM LS3/L92 w/ 95mm Top
    Advertised Price $1,126.95
    $1,013.95
    Save $113.00