Earl's Ultra Flex™ 650 PTFE hose solves the problem of ever tightening packaging constraints of modern day motorsports while keeping weight to a minimum.

Ultra Flex™ 660 series hose is made from 304 stainless and is 40% lighter and has an average of 14% larger ID than our (and our competitors) stainless braid-protected synthetic rubber hose.

All the benefits of Earl's Pro Lite 350 hose are present in Pro Lite Ultra, albeit a much higher pressure rating: 500 PSI vs. 350 PSI. It also boasts added strength for tighter radius applications.

Earl's UltraPro Series was engineered as a system to exceed the rigorous demands of even the most extreme forms of racing. PTFE inner liner is impervious to all known fuels, oils, and coolants used in automotive applications. This means UltraPro hose is not degraded or permeated by today’s fuel! Don't settle for good enough, Go UltraPro!

Earl's Pro-Lite 350™ hose is one of the lightest and most durable hoses available on the market today!

A stainless braided hose at a price competitive with the imports. Earl's Auto-Flex™ HTE stainless braid-protected synthetic rubber hose is manufactured to our specifications in the U.S.A.

All Speed-Flex™ hoses are compatible with gasoline, hydrocarbon fuels, alcohols, nitro-methane, mineral and synthetic lubricants, and high density fuel additives thanks to its stainless braid protected PTFE inner liner.

Super Stock™ hose is a high quality synthetic rubber hose reinforced by a full coverage interior braided fabric sheath.

Modern fuels are the enemy of traditional rubber hose (including steel-braided hose) causing deterioration. Rubber hose must be inspected and replaced frequently to eliminate the safety hazards associated with fuel vapors and leakage that occurs as the traditional rubber liner deteriorates. Use Earl’s Vapor Guard as your long-lasting hose solution!

A triple steel and fabric braid reinforced high pressure hose developed specifically to meet the demands of power steering systems, this flexible hose is also suitable for hydraulic and air lines.

Tube Braid is a Stainless Steel Covering that Slips Over Existing Hose, and Provides the Look of Expensive AN Plumbing. Tube Braid Can Also Be Used To Cover Wiring, Cables and Hard Line.

It is often necessary to insulate hoses (or cables) from extreme heat sources. Earl's non-asbestos flame guard is a very efficient insulating sleeve for hose assemblies!

Earl's inner support springs are designed for use with the Earl's Pro-Lite 350™ hose system. A support spring is recommended for suction applications or when very tight bends must be made.

The special FKM inner liner on this hose is more resistant to fuels than most synthetic rubber AN hose (Meets SAE 30R9 standard). Lighter weight than traditional stainless braided hose. Budget priced and designed for use with Mr. Gasket Swivel, Earl's Swivel-Seal, or Earl's Auto-Fit Hose Ends.

Wide Temperature Range, High Working Pressure, Textured Surface. You WILL NOT find this quality at a better price!

Clearance Sniper Push-On Hose (Parker 801 hose) is also Included on this Page Since it is compatible & Can be Used w/ the Mr Gasket Push-On Hose Ends.

Mr. Gasket stainless braided hose is budget priced and designed for use with Mr. Gasket Swivel Style hose ends.

Speed-Flex™ factory-assembled stainless steel brake lines are made from the same stainless braid extruded PTFE hose that is the world standard of the racing industry for flexible brake, clutch, and instrument hoses.