GM Truck Generations: 1960-1966

06/01/2021

GM Truck Generations: 1960-1966

06/01/2021

1960-1966 Chevy C10/GMC K10 Introduction


The 1960 model year introduced a new body style of light pick-up truck that featured many firsts. Most important of these were a drop-center ladder frame, allowing the cab to sit lower, and independent front suspension, giving an almost car-like ride in a truck. Also new for 1960 was a new designation system for trucks made by GM. Gone were the 3100, 3200, and 3600 designations for short 1/2, long 1/2, and 3/4-ton models. Instead, a new scheme would assign 10, 20, or 30 for 1/2, 3/4, and 1-ton models. Since 1957, trucks were available from the factory as 4-wheel drive, and the new class scheme would make this known. A "C" (Conventional) in front of the series number would indicate 2-wheel rear drive while a K would denote 4-wheel drive. Actual badging on trucks still carried the series name system from the previous generation. The 10, 20, 30, and 40 series (C or K) were badged as “Apache”, etc. 50, and 60 series trucks were badged as “Viking”, and the largest 70, 80, and 90 series models were marked “Spartan” etc. in 1960, C/K trucks were available in smooth “Fleetside” or fendered “Stepside” versions. GMC called these “Wideside” and “Fenderside.” Half-ton models were the C10 and K10 long-bed and short-bed trucks, and The 3/4-ton C20 and K20, as well as the one-ton C30, were also available. GMC did not use the “C” nomenclature, though their 4×4 versions had the “K” designation. GMC Model numbers for 1/2, 3/4, 1, and 1-1/2 ton were 1000, 1500, 2500, and 3000.


1960 Chevy C10/GMC K10 Differences


This model used torsion bar front suspension, with trailing arm suspension rear. Trim lines were base and “Custom.” Engines included the base GMC 305 in³ V6 for the GMC version, 135 hp (101 kW) 236 in³ (3.9 L) and 150 hp (112 kW) 261 in³ (4.3 L)straight-6s, and a 283 in³ (4.6 L) V8 with 185 hp (119 kW).


1961 Chevy C10/GMC K10 Differences


This model used torsion bar front suspension, with trailing arm suspension rear. Trim lines were base and “Custom.” Engines included the base GMC 305 in³ V6 for the GMC version, 135 hp (101 kW) 236 in³ (3.9 L) and 150 hp (112 kW) 261 in³ (4.3 L)straight-6s, and a 283 in³ (4.6 L) V8 with 185 hp (119 kW).


1962 Chevy C10/GMC K10 Differences


This model used torsion bar front suspension, with trailing arm suspension rear. Trim lines were base and “Custom.” Engines included the base GMC 305 in³ V6 for the GMC version, 135 hp (101 kW) 236 in³ (3.9 L) and 150 hp (112 kW) 261 in³ (4.3 L)straight-6s, and a 283 in³ (4.6 L) V8 with 185 hp (119 kW).


1963 Chevy C10/GMC K10 Differences


A coil-spring front suspension came in 1963; along with a new base engine, a 140 hp (104 kW) 230 in³ (3.8 L) I6, and an optional 165 hp (123 kW) 292 in³ (4.8 L) I6.


1964 Chevy C10/GMC K10 Differences


The cab was changed for 1964, with the elimination of the “wraparound” windshield and a new front grille design, along with various interior changes.


1965 Chevy C10/GMC K10 Differences


Air conditioning and a 220 hp (164 kW) 327 in³ (5.3 L) V8 came in 1965.


1966 Chevy C10/GMC K10 Differences


A new base engine finished the model in 1966 with a 155 hp (116 kW) 250 in³ (4.1 L) I6.

author

142 Posts