Skip to main content

Hooker Blackheart LS Swap Exhaust System - Stainless

Part # BH14306

1982-1987 Chevrolet El Camino and GMC Caballero. 2.5-inch dual, side exit, 409SS - Aggressive to moderate sound

Read More

Hooker Blackheart LS Swap Exhaust System - Stainless

Not Available

Dual exhaust system for 1982-1987 Chevrolet El Camino with LS engine swap. Choose from 2.50-inch or 3.00-inch diameter mandrel bent tubing with crossover for a broad torque curve. Features TIG welded stainless steel straight through absorption style mufflers and side exits.

Features:

  • Exhaust system designed for easy installation with Holley LS Swap System
  • Dual exhaust system with crossover – choose from 2.50-inch or 3.00-inch diameter with side exits
  • 409 stainless steel mandrel bent tubing - for strength and corrosion resistance
  • Original Equipment (OE) quality hardware (clamps, hanger rods, and rubber isolators) provides excellent fitment and leak-free installation
  • 304 stainless-steel straight-through absorption mufflers for an aggressive to moderate muscle car sound without the resonance

About Hooker BlackHeart

Shop the official site of Hooker BlackHeart and explore exhaust systems, engine swap kits, and mufflers for both import and domestic vehicles at Holley.com!

Brand Hooker BlackHeart
CategoryExhaust
Emission Code8
Exhaust SeriesHooker BlackHeart
Exit StyleDual Out Side
Inlet Diameter2.50 IN
Main Piping Diameter2.50 IN
Material409 Stainless Steel
Muffler Quantity2
Product TypeExhaust System
Single DualDual
Sound LevelAggressive / Moderate
Sub CategoryExhaust and Tail Pipes
Tail Pipe Outlet Outside Diameter2.50 IN
TypeHeader-Back
UPC090127135013
Part NumberBH14306
8

This product is engineered to facilitate the installation of a later model, emissions friendly engine into a vintage / classic vehicle. Federal guidelines indicate that an engine swap is allowable if one or more of the following conditions apply:

  • If there is a reasonable basis for knowing that emissions are not adversely affected as described in the EPA Tampering Policy dated November 23rd, 2020
  • The resulting vehicle is identical (with regard to all emissions related parts, engine design parameters and engine calibrations) to a certified configuration of the same or newer model year as the vehicle chassis
  • The vehicle is a uncontrolled vehicle - Vehicles that were manufactured before emission control regulations took effect are called uncontrolled vehicles. Aftermarket parts regulations and anti-tampering laws do not apply to these vehicles
  • An EO legal engine swap kit is utilized (such as a GM EROD)
  • The vehicle is being used for Competition Use Only - Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street

Consumers are responsible for complying with laws prohibiting tampering, and for ensuring that modified vehicles are operated in a manner that complies with applicable laws.

Motor vehicle emissions standards are intended to help achieve and maintain air quality goals that benefit human health and the environment. The U.S. Environmental Protection Agency, the California Air Resources Board, Environment Canada, and other regulatory agencies prohibit the operation of vehicles on public roads that violate applicable emissions standards. The alteration of certified production vehicles to modify, remove, or render inoperable emissions control hardware or software, known as "tampering" is prohibited by the U.S. Clean Air Act and other laws. Tampering with motor vehicles emissions control systems is punishable by substantial monetary penalties.

Holley is committed to performance parts that allow enthusiasts to modify their vehicles and meet emission requirements. The information provided here is intended to provide general guidance of interest to most consumers. This guidance may not apply to all vehicles or all situations. It is up to each consumer to evaluate his or her own situation and take the steps necessary to comply with applicable laws. The websites listed below have more information about regulations and policies pertaining to motor vehicle emissions. You should also check the regulations applicable to your local area.

EPA Website
https://www.epa.gov/enforcement/epa-tampering-policy-epa-enforcement-policy-vehicle-and-engine-tampering-and-aftermarket

CARB Website
https://ww3.arb.ca.gov/msprog/aftermkt/aftermkt.htm

Optional Adapter Pipes (sold separately): 70701317-RHKR - Use with Hooker Exhaust Manifolds 70701315-RHKR (2.5-inch), or 70701316-RHKR - Use with Mid-Length Swap Headers (race use only) 70701318-RHKR - Use with long-tube headers and 2.5-inch exhaust system BH14306 (race use only) Requires double hump style crossmember (i.e. 12644HKR or 12644HKR-1) since the factory crossmember doesn't have clearance for dual exhaust.

*Free Shipping and Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.